Normal Shutdown; Shutdown In Emergency Situations - Husqvarna SG11 Operator's Manual

Normal shutdown

Throttle
Set the throttle to START/DISENGAGE.
If the engine has been running full out, let it run
easily for about 30 seconds to 1 minute at low
speed.
Engine switch
Wait at least 20 seconds until the blade has
stopped.
Set the toggle switch to OFF.
Make sure that the blade is resting against the
ground and has stopped completely before doing
anything.
Brake
Activate the brake by pulling the lever backwards.
Fuel valve
Close the fuel valve. Turn the lever all the way to
the left (see illustration).

Shutdown in emergency situations

Release the dead man's grip.
Wait until the blade stops.
Make sure that the blade is resting against the
ground and has stopped completely before doing
anything.
RUNNING
8011-180
8011-181
8011-190
8011-186
English – 21