Starting The Engine; Running - Husqvarna SG11 Operator's Manual

Starting the engine

Check that all daily maintenance as described in
the maintenance schedule has been performed.
Check that there is sufficient fuel in the tank.
Fuel valve
Open the fuel valve. Turn the lever all the way to
the right.
Choke control
When starting the engine warm, the lever should be
in the right position; see the illustration.
When starting the engine cold or partially warm,
turn the lever completely or partly to the left.
Move the lever back to the right once the engine
starts. When the engine is cold, it may be best to
move the lever back in several stages. Find the
position where the engine runs smoothly.
Throttle
Set the throttle on the handle to the START /
DISENGAGE position.
Engine switch on the engine
Turn the engine switch clockwise to ON.

RUNNING

8011-182
8011-183
8011-180
8011-071
English – 19