Starting And Stopping; Before Starting; Starting; Stopping - Husqvarna PG 400 Operator's Manual

Before starting

• Position grinder on the working area.
• Make sure there are diamonds beneath the machine and
that they are firmly attached.
• Connect the vacuum cleaner to the machine.
• Use locking knobs for handlebar adjustment to set most
comfortable working height.
• Plug power supply to machine.
• Check that the emergency stop button is not pressed by
turning it clockwise.
• Check the motor's direction of rotation

Starting

• Reduce the pressure between grinding disc and floor by
pushing down on the handle without raising the grinding
unit off the ground.
• Press the start button and keep it pressed a few seconds
to start the machine.
14 –
English

STARTING AND STOPPING

Stopping

• Use the stop button to shut down the machine.
• Keep grinding segments in contact with the floor when
stopping. This will help bring the machine to a complete
stop quickly. Do not lift the grinding head off the floor
when stopping as this can create a significant amount of
dust in the air.
• Disconnect the power plug.