Wall Plate Digitalmedia™ Cat Transmitter 200/400: Dm-Tx-200-2G/400-3G; Introduction; Features And Functions - Crestron DigitalMedia DM-TX-200-2G Operations & Installation Manual

Wall plate digitalmedia cat transmitters
Table of Contents

Advertisement

Crestron DM-TX-200-2G/400-3G
Wall Plate DigitalMedia™ CAT
Transmitter 200/400:
DM-TX-200-2G/400-3G

Introduction

Operations & Installation Guide – DOC. 6949B
Wall Plate DigitalMedia™ CAT Transmitters
The DM-TX-200-2G and the DM-TX-400-3G are DM
switchers that install in a double-gang or a triple-gang electrical box (respectively) to
provide a convenient interface for computers and high-definition AV sources as part
of a complete DigitalMedia™ system.
®
With both HDMI
and RGB inputs, the DM-TX-200-2G and DM-TX-400-3G are
ideal for wall, lectern, and floor box applications in a boardroom, classroom, or
residence to provide an input for a laptop computer or similar source. The
DM-TX-400-3G includes additional input connections for SPDIF and analog AV
sources. Both transmitters connect to any DM-MD series DigitalMedia switcher or
DM-RMC-100 Room Controller (all sold separately) via a single DM cable.

Features and Functions

DigitalMedia transmitter and multimedia interface
Built-in 2x1 (DM-TX-200-2G) or 4x1 (DM-TX-400-3G) AV switcher
DM CAT output supports up to 450 foot (137 meter) cable length
2-gang (DM-TX-200-2G) or 3-gang (DM-TX-400-3G) wall mount
design
Available colors include black or white
Provides HDMI, RGB, component, and composite video inputs
Supports DVI and DisplayPort Multimode sources
Includes S/PDIF, RCA, and mini-TRS audio inputs
(Continued on following page)
1.
For DigitalMedia CAT wiring, use DM-CBL DigitalMedia Cable. Up to two DM Repeaters (Model
DM-DR, sold separately) may be required. Refer to the latest version of the Crestron DigitalMedia
Design Guide (Doc. 4789) for complete wiring guidelines. It is available from the Crestron Web site
(www.crestron.com/dmresources).
2.
Composite video inputs only available on DM-TX-400-3G.
3.
HDMI requires an appropriate adapter or interface cable to accommodate a DVI or DisplayPort
Multimode signal. CBL-HD-DVI and CBL-DP-HD interface cables available separately.
4.
S/PDIF and RCA audio inputs only available on DM-TX-400-3G.
Wall Plate DigitalMedia™ CAT Transmitters: DM-TX-200-2G/400-3G • 1
®
CAT transmitters and
1
2
3
4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Digitalmedia dm-tx-400-3g

Table of Contents