Crestron DigitalMedia DM-TX-200 Operations & Installation Manual
Digitalmedia cat transmitter 200
Hide thumbs
Also See for DigitalMedia DM-TX-200:
- Quick start manual (2 pages) ,
- Operations & installation manual (32 pages)
Related Manuals for Crestron DigitalMedia DM-TX-200
Summary of Contents for Crestron DigitalMedia DM-TX-200
- Page 1 Crestron DM-TX-200 DigitalMedia™ CAT Transmitter 200 Operations & Installation Guide...
-
Page 2: Regulatory Compliance
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. This device includes an aggregation of separate independent works that are each generally copyrighted by Crestron Electronics, Inc., with all rights reserved. One of those independent works, Linux Bridge Project, is copyrighted under the GNU GENERAL PUBLIC LICENSE, Version2, reproduced in “GNU General Public License”... -
Page 3: Table Of Contents
Crestron DM-TX-200 DigitalMedia™ CAT Transmitter 200 Contents DigitalMedia™ CAT Transmitter 200: DM-TX-200 Introduction ..........................1 Features and Functions ....................1 Applications......................... 4 Specifications ......................5 Physical Description....................9 Setup ............................13 Network Wiring......................13 Identity Code ......................13 Installation ......................... 14 Hardware Hookup ..................... -
Page 5: Digitalmedia™ Cat Transmitter 200: Dm-Tx-200
DigitalMedia system. With both HDMI™ and RGB inputs, the DM-TX-200 is ideal for use at a lectern, conference table, wall plate or any remote location in a boardroom, classroom or residence to provide an input for a laptop computer or similar source. - Page 6 2. HDMI requires an appropriate adapter or interface cable to accommodate a DVI or DisplayPort Multimode signal. CBL-HD-DVI and CBL-DP-HD interface cables sold separately. 3. The RGB input can accept component, composite and S-video signals via direct interface to Crestron MPS Series products (sold separately) or through an appropriate adapter (not included). Input sync detection is not provided for composite or S-video signal types through the RGB connection.
- Page 7 DigitalMedia allows you to take control of each device in the system as you like. Compact and Versatile The DM-TX-200 is designed to be placed on a shelf or mounted on a flat surface. It is compact enough to fit discreetly inside a presentation lectern or beneath a table ®...
-
Page 8: Applications
The following diagram shows a DM-TX-200 in a basic application. DM-TX-200 in a Basic Application No LAN connection is required for the DM-TX-200 to transmit HDMI or USB in a point-to-point configuration. If you wish to use the control ports (IS, RS-232, Relay, Sense) from a control system, you can connect either LAN port (on the DM-RMC-100 or on the DM-TX-200) to the control system’s network. -
Page 9: Specifications
Crestron DM-TX-200 DigitalMedia™ CAT Transmitter 200 Specifications Specifications for the DM-TX-200 are listed in the following table. DM-TX-200 Specifications SPECIFICATION DETAILS Video Switcher 2x1 combination digital/analog switch, Crestron QuickSwitch HD Input Signal Types HDMI, DVI , DisplayPort Multimode , RGB,... - Page 10 , Dolby Digital EX, DTS Formats, HDMI DTS-ES, DTS 96/24 5.1, up to 8ch PCM Formats, Analog Stereo 2-channel Analog to Digital Conversion 24-bit 48 kHz (Continued on following page) 6 • DigitalMedia™ CAT Transmitter 200: DM-TX-200 Operations & Installation Guide – DOC. 6741C...
- Page 11 Crestron Certified Computer-VGA Interface Cable CBL-VGA-AUD Crestron Certified Computer-VGA Interface Cable with Mini-TRS Audio DM-CBL DigitalMedia Cable DM-CONN DigitalMedia Cable Connector DM-DR DigitalMedia CAT Repeater (Continued on following page) DigitalMedia™ CAT Transmitter 200: DM-TX-200 • 7 Operations & Installation Guide – DOC. 6741C...
- Page 12 MPS Series products (sold separately) or through an appropriate adapter (not included). Input sync detection is not provided for composite or S-video signal types through the RGB connection. 3. The latest software versions can be obtained from the Crestron website. Refer to the NOTE following these footnotes.
-
Page 13: Physical Description
This section provides information on the connections, controls and indicators available on your DM-TX-200. DM-TX-200 Physical View (Bottom Ports Shown) DM-TX-200 Physical View (Top Ports Shown) DigitalMedia™ CAT Transmitter 200: DM-TX-200 • 9 Operations & Installation Guide – DOC. 6741C... - Page 14 DM-TX-200 Overall Dimensions (Top View) 2.76 in (70 mm) 1.68 in (43 mm) DM-TX-200 Overall Dimensions (Front View) 6.97 in (177 mm) DM-TX-200 Overall Dimensions (Bottom View) 10 • DigitalMedia™ CAT Transmitter 200: DM-TX-200 Operations & Installation Guide – DOC. 6741C...
- Page 15 1. An interface connector for the G B A 24 port is provided with the unit. 2. The RGB input can accept component, composite and S-video signals via direct interface to Crestron MPS Series products (sold separately) or through an appropriate adapter (not included). Input sync detection is not provided for composite or S-video signal types through the RGB connection.
- Page 16 Brown 7. For DigitalMedia CAT wiring, use DM-CBL DigitalMedia Cable. Up to two DM Repeaters (model DM-DR, sold separately), may be required. Refer to the latest version of the Crestron DigitalMedia Design Guide (Doc. 4789) for complete wiring guidelines. 8. DMNet wiring is not compatible with Cresnet wiring. DMNet wiring cannot be daisy chained.
-
Page 17: Setup
The IP ID is set within the DM-TX-200’s table using Crestron Toolbox. For information on setting an IP table, refer to the Crestron Toolbox help file. The IP IDs of multiple DM-TX-200 devices in the same system must be unique. -
Page 18: Installation
Installation To prevent overheating, do not operate this product in an area that exceeds the environmental range listed in the table of specifications. The following tools and accessories are required for mounting a DM-TX-200 to a surface: • Phillips screwdriver (not supplied) •... -
Page 19: Hardware Hookup
NOTE: Minimum recommended length for DM-CBL DigitalMedia cable is 15 feet (~4.6 meters). NOTE: When used without a DM switcher, the DM-TX-200 can be powered by a PW-2407-RU or any Crestron 24 Volt power supply. Power supply not included. DigitalMedia™ CAT Transmitter 200: DM-TX-200 • 15... -
Page 20: Programming Software
Configuration Manager is the view where programmers “build” a Crestron control system by selecting hardware from the Device Library. In the example shown on the following page, the DM-TX-200 is being used in a DigitalMedia system with a DM-MD8X8 Switcher, equipped with a DMC-CAT input card. - Page 21 C2Net Device, Slot 8 (Using Input Card in DM Switcher) NOTE: Alternatively, the DM-TX-200 can be dragged directly to a card such as the C2ENET-2, in the Ethernet slot of the control system, when it is to be used without a DM switcher.
-
Page 22: Example Program
The symbol can be viewed by double clicking on the icon or dragging it into Detail View. Each signal in the symbol is described in the SIMPL Windows help file (F1). Example Program An example program for the DM-TX-200 is available from the Crestron website (www.crestron.com/exampleprograms). 18 • DigitalMedia™ CAT Transmitter 200: DM-TX-200... -
Page 23: Uploading And Upgrading
DM switcher, its IP ID is assigned automatically and does not require additional programming or configuration. Use the information below when the DM-TX-200 is dropped directly into an Ethernet slot on the control system in SIMPL Windows, without a DM switcher. -
Page 24: Firmware
FTP site.) To upgrade DM-TX-200 firmware: 1. If the DM-TX-200 is being used with a DM switcher, use the Device Discovery Tool in Crestron Toolbox to find the switcher’s IP address. If the DM-TX-200 is being used standalone (with a DM-RMC-100) use the Device Discovery Tool to find the DM-TX-200’s IP address. -
Page 25: Ip Configuration
When using the DM-TX-200 with a DM-RMC-100 (i.e. without a DM switcher), be sure to use Crestron Toolbox to create the DM-TX-200 IP table. 1. Use the Device Discovery Tool to find the IP address of the DM-TX-200. Then, in the Toolbox, display the “System Info” window and select the DM-TX-200 entry from the Address Book. -
Page 26: Problem Solving
Use the Right Wire In order to ensure optimum performance over the full range of your installation topology, Crestron Certified Wire and only Crestron Certified Wire may be used. Failure to do so may incur additional charges if support is required to identify performance deficiencies because of using improper wire. -
Page 27: Reference Documents
1080p60 Deep Color Not supported NOTE: All Crestron certified DMNet wiring must consist of two twisted pairs. One twisted pair is the +24V conductor and the GND conductor and the other twisted pair is the A conductor and the B conductor. -
Page 28: Return And Warranty Policies
Purchasers should inquire of the dealer regarding the nature and extent of the dealer's warranty, if any. CRESTRON shall not be liable to honor the terms of this warranty if the product has been used in any application other than that for which it was intended or if it has been subjected to misuse, accidental damage, modification or improper installation procedures. -
Page 29: Gnu General Public License
License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. DigitalMedia™ CAT Transmitter 200: DM-TX-200 • 25 Operations & Installation Guide – DOC. 6741C... - Page 30 5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by 26 • DigitalMedia™ CAT Transmitter 200: DM-TX-200 Operations & Installation Guide – DOC. 6741C...
- Page 31 THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. DigitalMedia™ CAT Transmitter 200: DM-TX-200 • 27 Operations & Installation Guide – DOC. 6741C...
- Page 32 Crestron Electronics, Inc. Operations & Installation Guide – DOC. 6741C 15 Volvo Drive Rockleigh, NJ 07647 (2024102) Tel: 888.CRESTRON 04.10 Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.
Need help?
Do you have a question about the DigitalMedia DM-TX-200 and is the answer not in the manual?
Questions and answers