Firmware - Crestron DigitalMedia DM-TX-200-2G Operations & Installation Manual

Wall plate digitalmedia cat transmitters
Table of Contents

Advertisement

Crestron DM-TX-200-2G/400-3G
Operations & Installation Guide – DOC. 6949B
Wall Plate DigitalMedia™ CAT Transmitters

Firmware

Firmware files may be distributed from programmers to installers or from Crestron
to dealers. Firmware upgrades are available from the Crestron Web site as new
features are developed after product releases. For details on upgrading, refer to the
Crestron Toolbox help file.
Check the Crestron Web site to find the latest firmware. (New users may be required
to register to obtain access to certain areas of the site, including the FTP site.)
To upgrade the DM-TX-200-2G or DM-TX-400-3G's firmware:
1. Do either of the following
If the DM-TX-200-2G or DM-TX-400-3G is connected to a DM
switcher, use the Device Discovery Tool in Crestron Toolbox to find
the IP address of the switcher.
If the DM-TX-200-2G or DM-TX-400-3G is being used in standalone
configuration (i.e., without a DM switcher), use the Device Discovery
Tool to find the IP address of the DM-TX-200-2G or DM-TX-400-3G.
2. Add the IP address to the Address Book in Toolbox.
3. Download the appropriate .puf file from the Crestron Web site to your PC.
4. Double-click the .puf file. The Toolbox Address Book opens.
5. From the list in the Address Book, select the DM switcher (if the
DM-TX-200-2G or DM-TX-400-3G is connected to a switcher) or the
DM-TX-200-2G or DM-TX-400-3G (if the DM-TX-200-2G or
DM-TX-400-3G is used in a standalone configuration), and then click OK.
Either of the following occurs:
If the DM switcher was selected, a DM device list is displayed that
allows upgrading all DM devices connected to the switcher.
If the DM-TX-200-2G or DM-TX-400-3G was selected, a DM device
list is displayed that allows upgrading of the DM-TX-200-2G or
DM-TX-400-3G only.
In the DM device lists that are displayed, the checkbox of any item that
needs to be upgraded is automatically selected.
6. Click Update.
7. After the process is complete, click Recheck to verify the upgrade.
Wall Plate DigitalMedia™ CAT Transmitters: DM-TX-200-2G/400-3G • 31

Advertisement

Table of Contents
loading

This manual is also suitable for:

Digitalmedia dm-tx-400-3g

Table of Contents