Subscribe to Our Youtube Channel
Related Manuals for Crestron DM-TX-201-C
Summary of Contents for Crestron DM-TX-201-C
- Page 1 Crestron DM-TX-201-C DigitalMedia 8G+™ Transmitter 201 Operations & Installation Guide...
-
Page 2: Regulatory Compliance
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. This device includes an aggregation of separate independent works that are each generally copyrighted by Crestron Electronics, Inc., with all rights reserved. One of those independent works, Linux Bridge Project, is copyrighted under the GNU GENERAL PUBLIC LICENSE, Version2, reproduced in “GNU General Public License”... -
Page 3: Table Of Contents
Crestron DM-TX-201-C DigitalMedia 8G+™ Transmitter 201 Contents DigitalMedia 8G+™ Transmitter 201: DM-TX-201-C Introduction ..........................1 Features and Functions ....................1 Applications......................... 4 Specifications ......................5 Physical Description....................9 Setup ............................14 Network Wiring......................14 Identity Code ......................14 Installation ......................... 15 Hardware Hookup ..................... -
Page 5: Digitalmedia 8G+™ Transmitter 201: Dm-Tx-201-C
Detects and reports detailed video and audio input information (Continued on following page) 1. For DM 8G+ wiring up to 330 feet (100 meters) between devices, use Crestron DM-CBL-8G DigitalMedia 8G cable, Crestron DM-CBL DigitalMedia cable, Crestron DM-CBL-D DigitalMedia D cable, or generic CAT5e (or better) UTP or STP. - Page 6 HDMI or DVI monitor, eliminating the need for an extra outboard distribution amp or other hardware. 1. For DM 8G+ wiring up to 330 feet (100 meters) between devices, use Crestron DM-CBL-8G DigitalMedia 8G cable, Crestron DM-CBL DigitalMedia cable, Crestron DM-CBL-D DigitalMedia D cable, or generic CAT5e (or better) UTP or STP.
- Page 7 DigitalMedia allows you to take control of each device in the system as you like. Compact and Versatile The DM-TX-201-C can be mounted on a flat surface or placed on a shelf. It is compact enough to fit discreetly inside a presentation lectern or beneath a table, and can even be attached to a rack rail in the back of an equipment cabinet.
-
Page 8: Applications
Crestron DM-TX-201-C Applications The following diagram shows a DM-TX-201-C in a standalone application. In this type of application, the DM-TX-201-C is used with a DM 8G+ receiver/room controller such as the DM-RMC-100-C and is not used with a DM switcher. -
Page 9: Specifications
Crestron DM-TX-201-C DigitalMedia 8G+™ Transmitter 201 Specifications Specifications for the DM-TX-201-C are listed in the following table. DM-TX-201-C Specifications SPECIFICATION DETAILS Video Switcher 2x1 combination digital/analog switch, ® Crestron QuickSwitch HD Input Signal Types HDMI, DVI , DisplayPort Multimode , RGB,... - Page 10 , Dolby Digital EX, DTS DTS-ES, DTS 96/24, up to 8ch PCM Formats, Analog Stereo 2-channel Analog to Digital Conversion 24-bit 48 kHz (Continued on following page) 6 • DigitalMedia 8G+™ Transmitter 201: DM-TX-201-C Operations & Installation Guide – DOC. 6958B...
- Page 11 Interface Cable CBL-HD Crestron Certified HDMI Interface Cable CBL-HD-DVI Crestron Certified HDMI to DVI Interface Cable CBL-VGA Crestron Certified Computer VGA Interface Cable (Continued on following page) DigitalMedia 8G+™ Transmitter 201: DM-TX-201-C • 7 Operations & Installation Guide – DOC. 6958B...
- Page 12 (Doc. 4556) for complete wiring guidelines and to the Crestron DigitalMedia Design Guide (Doc. 4789) for complete system design guidelines. All cable sold separately. 4. Either a power pack or power over DM—but not both—can be used to power the DM-TX-201-C. 8 • DigitalMedia 8G+™ Transmitter 201: DM-TX-201-C...
-
Page 13: Physical Description
Crestron DM-TX-201-C DigitalMedia 8G+™ Transmitter 201 5. The latest software versions can be obtained from the Crestron Web site. Refer to the NOTE following these footnotes. 6. Crestron 2-Series control systems include the AV2 and PRO2. Consult the latest Crestron Product Catalog for a complete list of 2-Series control systems. - Page 14 DigitalMedia 8G+™ Transmitter 201 Crestron DM-TX-201-C DM-TX-201-C Overall Dimensions (Front and Side Views) 4.00 in 6.47 in (102 mm) (165 mm) 1.24 in 6.89 in (32 mm) (175 mm) DM-TX-201-C Overall Dimensions (Top and Bottom Views) 7.36 in (187 mm) 12 13 10 •...
- Page 15 Green LED indicates Ethernet link status; Amber LED indicates Ethernet activity SIGNAL SIGNAL TX + PIN 8 PIN 1 TX - RX - RX + (Continued on following page) DigitalMedia 8G+™ Transmitter 201: DM-TX-201-C • 11 Operations & Installation Guide – DOC. 6958B...
- Page 16 1. HDMI requires an appropriate adapter or interface cable to accommodate a DVI or DisplayPort Multimode signal. CBL-HD-DVI interface cable sold separately. 2. The RGB input can accept component, composite, and S-video signals via direct interface to Crestron MPS Series products (sold separately) or through an appropriate adapter (not included). Input sync detection is not provided for composite or S-video signal types through the RGB connection.
- Page 17 6. Power over DM requires connection to a DM 8G+ power sourcing device. 7. For DM 8G+ wiring up to 330 feet (100 meters) between devices, use Crestron DM-CBL-8G DigitalMedia 8G cable, Crestron DM-CBL DigitalMedia cable, Crestron DM-CBL-D DigitalMedia D cable, or generic CAT5e (or better) UTP or STP.
-
Page 18: Setup
The IP ID is set within the DM-TX-201-C IP table using Crestron Toolbox. For information on setting an IP table, refer to the Crestron Toolbox help file. The IP IDs of multiple DM-TX-201-C devices in the same system must be unique. -
Page 19: Installation
The DM-TX-201-C can also be mounted on a rack rail. Mounting on a Flat Surface To mount the DM-TX-201-C on a flat surface such as a wall or ceiling, use four mounting screws (not included). The following illustration shows mounting of the DM-TX-201-C on a wall. - Page 20 DigitalMedia 8G+™ Transmitter 201 Crestron DM-TX-201-C Rack Mounting To mount the DM-TX-201-C on the left or right rail of a rack, use two rack mounting screws (not included). The following illustration shows mounting of the DM-TX-201-C on the right rail of a rack.
-
Page 21: Hardware Hookup
UTP or STP. Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. Refer to the latest version of the Crestron DigitalMedia Infrastructure Guide (Doc. 4556) for complete wiring guidelines and to the Crestron DigitalMedia Design Guide (Doc. -
Page 22: Programming Software
Have a question or comment about Crestron software? Answers to frequently asked questions (FAQs) can be viewed in the Online Help section of the Crestron Web site. To post a question or view questions you have submitted to Crestron’s True Blue Support, log in at www.crestron.com/support. - Page 23 C2ENET-2 Device, Slot 8 (Using Input Card in a DM Switcher) C2ENET-2 Device, Slot 8 (Using Ethernet Slot on Control System) 2. If additional DM-TX-201-C devices are to be added, repeat step 1 for each device. Each DM-TX-201-C device is assigned a different IP ID.
- Page 24 IP ID of each unit. Refer to “Identity Code” on page 14. Program Manager Program Manager is the view where programmers “program” a Crestron control system by assigning signals to symbols. The symbol can be viewed by double clicking on the icon or dragging it into Detail View.
-
Page 25: Uploading And Upgrading
1. Establish communication between the PC and the DM switcher as described in the latest version of the DigitalMedia Switchers Operations Guide (Doc. 6755). 2. Use the Device Discovery Tool in Crestron Toolbox to find the IP address of the DM-TX-201-C. The tool is available in Toolbox version 1.15.143 or later. - Page 26 DM 8G+ To establish USB communication between the PC and the DM switcher: 1. Use the Address Book in Crestron Toolbox to create an entry using the expected communication protocol (USB). When multiple USB devices are connected, identify the DM switcher by entering “DM-MD8X8”, “DM-MD16X16”, or “DM-MD32X32”...
-
Page 27: Firmware
For details on upgrading, refer to the Crestron Toolbox help file. Check the Crestron Web site to find the latest firmware. (New users may be required to register to obtain access to certain areas of the site, including the FTP site.) To upgrade DM-TX-201-C firmware: 1. -
Page 28: Ip Configuration
DM switcher), use Crestron Toolbox to create the IP table entry of the DM-TX-201-C. NOTE: If the DM-TX-201-C is connected to a DM switcher, the IP table entry of the DM-TX-201-C is created automatically. 1. Use the Device Discovery Tool to find the IP address of the DM-TX-201-C. -
Page 29: Problem Solving
Crestron DM-TX-201-C DigitalMedia 8G+™ Transmitter 201 Problem Solving Troubleshooting The following table provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. DM-TX-201-C Troubleshooting TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION Power LED does... -
Page 30: Reference Documents
Crestron Web site (www.crestron.com) for a listing of Crestron worldwide offices. You can also log onto the online help section of the Crestron Web site (www.crestron.com/onlinehelp) to ask questions about Crestron products. First-time users will need to establish a user account to fully benefit from all available features. -
Page 31: Future Updates
Crestron DM-TX-201-C DigitalMedia 8G+™ Transmitter 201 Future Updates As Crestron improves functions, adds new features and extends the capabilities of the DM-TX-201-C, additional information may be made available as manual updates. These updates are solely electronic and serve as intermediary supplements prior to the release of a complete technical documentation revision. -
Page 32: Return And Warranty Policies
Purchasers should inquire of the dealer regarding the nature and extent of the dealer's warranty, if any. CRESTRON shall not be liable to honor the terms of this warranty if the product has been used in any application other than that for which it was intended or if it has been subjected to misuse, accidental damage, modification or improper installation procedures. -
Page 33: Gnu General Public License
You may charge a fee for the physical act of transferring a copy and you may at your option offer warranty protection in exchange for a fee. DigitalMedia 8G+™ Transmitter 201: DM-TX-201-C • 29 Operations & Installation Guide – DOC. 6958B... - Page 34 Program (or any work based on the Program), you indicate your acceptance of this License to do so and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 30 • DigitalMedia 8G+™ Transmitter 201: DM-TX-201-C Operations & Installation Guide – DOC. 6958B...
- Page 35 THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. DigitalMedia 8G+™ Transmitter 201: DM-TX-201-C • 31 Operations & Installation Guide – DOC. 6958B...
- Page 36 Crestron Electronics, Inc. Operations & Installation Guide – DOC. 6958B 15 Volvo Drive Rockleigh, NJ 07647 (2027158) Tel: 888.CRESTRON 06.11 Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.
Need help?
Do you have a question about the DM-TX-201-C and is the answer not in the manual?
Questions and answers