Cisco SPA525G User Manual page 52

Using Advanced Phone Functions
Using Your Bluetooth-Enabled Mobile Phone
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
STEP 8
Cisco Small Business SPA525G and SPA525G2 SPCP IP Phones User Guide
Initiating Pairing from the Cisco SPA525G2
The Cisco SPA525G2 connects to one Bluetooth device at a time. If multiple
Bluetooth devices are in range of the Cisco SPA525G2, the order of devices in the
Bluetooth Configuration > Bluetooth Profiles list is used, and the device with a
higher priority is activated first.
To pair a Bluetooth device with the IP phone:
Enable Bluetooth on the IP phone as described in the
section on page 50.
Press the Setup button.
Scroll to User Preferences and press Select.
Scroll to Bluetooth Configuration and press Select.
Scroll to Bluetooth Mode and press the Right Arrow key to choose one of the
following:
• Handsfree—Your Cisco SPA525G2 will operate as a handsfree device with
a Bluetooth-enabled mobile phone.
• Phone—Your Cisco SPA525G2 pairs with a Bluetooth headset only. Choose
this option if you do not use the IP phone with a Bluetooth–enabled mobile
phone.
• Both—Your Cisco SPA525G2 will operate with your Bluetooth-enabled
mobile phone or a Bluetooth headset.
Scroll to Bluetooth Profiles and press the Right Arrow key to enter the profile
screen.
Press Scan to scan for the Bluetooth device.
Depending on the network environment (for example, the number of Bluetooth
devices and noise level), your Bluetooth headset might not appear on the found
devices list. Ensure the headset is powered on and has Bluetooth activated, and
retry the scan.
In the Select a Bluetooth Device to Pair list, select the device that you want to pair
and press Connect.
"Enabling Bluetooth"
4
51