Cisco SPA525G User Manual page 31

Installing Your Phone
Connecting Your Phone to the Network
STEP 1
STEP 2
STEP 3
STEP 4
NOTE
STEP 1
STEP 2
STEP 3
Cisco Small Business SPA525G and SPA525G2 SPCP IP Phones User Guide
f. Save your changes.
g. On the Cisco SPA525G and Cisco SPA525G2, with PIN Configuration
highlighted, press Select. To add the connection as a profile, press OK. Your
phone might reboot before the Wi-Fi connection is established.
Manually Adding a Wireless Profile
To add a new wireless network profile:
In the Network Configuration screen, ensure Wi-Fi is enabled.
Scroll to Wi-Fi Configuration and press the Right Arrow key to enter the Wi-Fi
Configuration screen.
Select Wireless Profile. Current wireless profiles are displayed.
Do one of the following tasks:
• Scan for available networks. See
page 30.
• Manually add the network. See
Scanning for Available Networks
If your router has SSID (router name) broadcast disabled, it might not appear in the
list of networks. In that case, you must manually add the SSID (see
Adding a Network, page
In the Wireless Profile screen, press Scan.
In the list of available networks, scroll to the desired network and click Add to
select the highlighted network.
(Optional) Press the Right Arrow key under Security Mode to set the security
options:
• WEP—Wired Equivalent Privacy: You must enter the Default Transmit Key,
Key Type and Length, and the keys.
• WPA PSK or WPA2 PSK: You must enter the Cipher Type (TKIP or AES
CCMP) and the shared key.
Scanning for Available Networks,
Manually Adding a Network, page
31).
2
31.
Manually
30