Cisco SPA525G User Manual page 32

Installing Your Phone
Connecting Your Phone to the Network
STEP 4
STEP 1
STEP 2
Cisco Small Business SPA525G and SPA525G2 SPCP IP Phones User Guide
• WPA/WPA2 Enterprise: This type of authentication requires some advanced
expertise because it involves setting up a radius server for authentication
and, in some cases, creation of certificates for both the radius server and the
phone. See
You must enter the Cipher Type (TKIP or AES CCMP) and the EAP Type:
- TTLS—Enter the anonymous ID, choose whether the phone should
check for the server certificate, choose the TTLS Inner Protocol
(MSCHV2, MSCHAP, PAP, CHAP, or MD5), and enter the user ID and
password.
- LEAP—Enter the user ID and password.
- TLS—Enter the user ID, choose whether the phone should check for the
server certificate, enter the user ID, and configure the root certificate and
user certificate (see the
Phone" section on page
To save as a wireless profile, press Save.
Manually Adding a Network
From the Wireless Profile screen, press Option and select Add New to manually
add the network.
(Optional) Press the Right Arrow key under Security Mode to set the security
options:
• WEP—Wired Equivalent Privacy: You must enter the Default Transmit Key,
Key Type and Length, and the keys.
• WPA PSK or WPA2 PSK: You must enter the Cipher Type (TKIP or AES
CCMP) and the shared key.
• WPA/WPA2 Enterprise: You must enter the Cipher Type (TKIP or AES CCMP)
and the EAP Type:
- TTLS: Enter the anonymous ID (typically, anonymous unless the RADIUS
server has other rules), choose whether or not the phone should check
for the server certificate, choose the TTLS Inner Protocol (MSCHV2,
MSCHAP, PAP, CHAP, or MD5), and enter the User ID and password.
- LEAP: Enter the User ID and password.
"Uploading Security Certificates to the
32).
2
31