Placing Or Answering A Call; Adjusting Call Volume And Muting - Cisco SPA525G User Manual

Using Basic Phone Functions

Placing or Answering a Call

Placing or Answering a Call

Adjusting Call Volume and Muting

Cisco Small Business SPA525G and SPA525G2 SPCP IP Phones User Guide
You might have to dial a number or numbers to reach an outside line. Ask your
system administrator.
Depending on the phone system setup, you might be able to place or answer calls
by using various methods.
To place or answer a call:
• Pick up the handset.
• Press the Speaker button.
• Press the Headset button.
• Press a line button to place a call or a blinking line button to answer a call.
• Dial the number, and then lift the handset.
• Dial the number and press Dial.
• Press New Call and dial the number.
• Select a number from the directory and press Dial.
• Press Redial to dial the last number that you called.
• If you are on a call and another call comes in, press Answer to place the
current call on hold and answer the incoming call. To return to the first call,
select it by using the Up Arrow key or the Down Arrow key and then press
Resume.
• To place a new call while another call is active on the same line, press Hold,
press New Call, and enter the number.
To adjust the volume while you are on a call, press + on the Volume button to
increase the volume, or press - to decrease the volume. Press Save.
Pressing the Volume button while not on a call adjusts the volume of the phone
ringer.
3
36