Table of Contents
Advertisement
Make multiple sets of copies
Feed the next original, define the enabled settings for this original if necessary and
press the green start key.
Repeat this step until all originals are fed.
Select 'Close set' with the upper-right softkey.
3.
How to make multiple sets of copies sorted by page
Feed the first original face down and right aligned.
1.
The scanner takes the original.
Define the job settings.
2.
Select 'Copy' with the upper-left softkey.
The copy job templates appear.
Open a copy job template with a left softkey.
The 'Create set' option appears at the upper-right corner of the screen.
Select 'Create set' with the upper-right softkey.
The 'Cancel set' option appears at the upper-left corner of the screen. The 'Close set'
option appears at the upper-right corner of the screen.
Scroll to 'Collate' and define 'By page' with the left softkey. This setting is disabled
after you press the green start key for the first time.
Scroll to another setting if necessary, select the setting with the left softkey and define
the value with the scroll wheel.
Define the number of copies for the first original if necessary and press the green start
key.
Feed the next original, define the enabled settings and the number of copies for this
original if necessary and press the green start key.
Repeat this step until all originals are fed.
Select 'Close set' with the upper-right softkey.
3.
Result
The Océ TDS750 copies a set of originals sorted by set or by page.
94
Chapter 3 - Use the Océ TC4 scanner
Advertisement
Table of Contents
