Table of Contents
Advertisement
Selecting the scale conversion
Select the "Image" card in the "Copy" section.
1.
Select scale table. The 8 predefined conversion steps become active.
2.
Select the preferred enlargement or reduction step with the Scale table function key. The
3.
scale step immediately converts the original media size to another, fixed media size, for
example from A0 to A1.
Note:
The values of the conversions are defined by the key operator in the Océ TDS750
Power Logic
®
Controller application.
Chapter 4 - Use the Océ TDS600 scanner
Select the scale factor
143
Advertisement
Table of Contents
