Table of Contents
Advertisement
Set media type for manual feed
Press the Online key on the printer operator panel to put the printer offline. The message
1.
Offline is displayed in the status window.
Press the left selection key to shift the focus to the Media option. A shadow effect is used
2.
to indicate that the focus is set to this option.
Use the Up/Down keys to select the Manual option.
3.
Press the right selection key to activate the Mat. (Material) option. The dotted line around
4.
the current selection is changed into an uninterrupted line and the small selection triangles
next to the specified material are no longer dimmed.
Use the Up/Down keys to select the material you just loaded.
5.
Press the Online key to put the printer online again. The printer now knows which ma-
6.
terial is used by the manual feeder.
Set media size
Press the Online key on the printer operator panel to put the printer offline. The message
1.
Offline is displayed in the status window.
Press the left selection key to shift the focus to the Media option. A shadow effect is used
2.
to indicate that the focus is set to this option.
Use the Up/Down keys to select the roll or sheet feeder for which you have just loaded
3.
new media.
Press the right selection key to activate the Size option. The dotted line around the current
4.
selection is changed into an uninterrupted line and the small selection triangles next to
the specified size are no longer dimmed.
Use the Up/Down keys to select the size for the media you just loaded. The printer shows
5.
both DIN and ANSI sizes. Select a size from the correct format.
Press the Online key to put the printer online again. The printer now knows which media
6.
size is used for the specified roll or sheet feeder.
Media type and size on the printer
Chapter 2 - Use the Océ TDS750 to print a job
51
Advertisement
Table of Contents
