Table of Contents
Advertisement
Part
Océ TDS750
Power Logic
Controller
Illustration
[16] On / off switch at the rear of the printer
Description
Use the On / Off key at the front of the printer to turn on and off
®
the controller that is located inside the printer.
When the controlller is on:
Press the key only once and wait 30-60 seconds. The green LED of
the key turns off to indicate that the controller is turned off. Keep
the key pressed for 4 seconds to immediately turn off the controller.
When the controller is off:
Press the key only once to start up the controller. The green LED
is turned on when you press the key.
You can also shut down the controller in the Océ TDS750 Power
®
Logic
Controller application. Access the System menu in the top
toolbar to do so.
Note:
Use the power key at the front of the controller when the
controller is not placed in the printer but in a separate con-
sole.
Turn on and off the Océ TDS750
Chapter 1 - Introduction
33
Advertisement
Table of Contents
