Table of Contents
Advertisement
Using the timer (Main unit only)
Before setting the timer, make sure that the clock is set to the
present time. See "ADJUSTING THE CLOCK".
Set the wake-up time, source to be heard and volume level. At the set
time, the selected source will be heard. The wake up timer will function
every day unless it is released.
Example:
Waking up 7:30 every day and listening to music until 8:15.
1. Load a compact disc, or select "TUNER".
-
If "TUNER" is selected, select the desired station first.
-
Adjust the volume level as desired.
2. Press the DISPLAY button.
The preset time appears.
3. Press the DISPLAY button again.
"
ON" blinks. The previous wake-up time appears.
4. Press the MEMORY button.
"
ON" and "hour" display blink.
5. Press the TIME SET – or + button to set the "hour" display.
6. Press the MEMORY button.
"
ON" and "minute" display blink.
7. Press the TIME SET – or + button to set the "minute" display.
8. Press the MEMORY button.
The completes the setting of the ON time.
"
ON" blinks.
9. Press the DISPLAY button while "
"
OFF" blinks.
The previous timer OFF time appears.
10. Press the MEMORY button.
"
OFF" and "hour" display blink.
11. Set the OFF time by following steps 5 to 8 above.
This completes the setting of the OFF time.
12. Press the DISPLAY button.
The original display returns.
13. Press the TIMER button.
"
" appears on the display.
14. Press the z/ON button to turn the power off.
The present time display remains. "
When the timer ON time arrives, the power is turned on automatically
and the unit starts playing with the preset function selected.
-
"
" remains lit while timer operation is engaged.
-
When the timer OFF time arrive, the power turn off and the timer is
set to the standby mode. Timer operation repeat this cycle every
day.
TIMER OPERATION
ON" is blinking.
" remains lit.
To check the timer settings
Turn on the power, then press the DISPLAY button repeatedly. The
timer setting are displayed in the following order.
-
Present time
-
ON time
-
OFF time
-
Original display returns.
To change the timer settings
1. Press the DISPLAY button to select the setting to be changed.
2. Press the MEMORY button, so that the display blinks.
3. Change the setting as explained above.
To cancel the timer/To use the timer again with the same contects:
1. Press the TIMER button. "
The TIMER ON time and TIMER OFF time will not function.
-
To use the previous timer setting, press the TIMER button again
to display "
".
2. Press the z/ON button to turn the power off.
Using the snooze timer
When the power is turned on at the timer ON time, the sound will be
gradually turned up to the position previously set with the VOLUME
control.
You can turn off the sound temporarily by pressing the SNOOZE button.
"SNOOZE" blinks.
The sound will stop for approximately 9 minutes but will start again and
this will be repeated.
Using the sleep l k timer
This timer automatically switches off the power after a preset time has
elapsed. There are 9 time periods available: 90, 80, 70, 60, 50, 40, 30,
20 and 10 minutes.
Press and hold down the SLEEP button to select the desired sleep
time. "SLEEP" blinks and the selected time appears on the display.
After several seconds, the original display returns, "SLEEP" remains lit.
To release the sleep timer while in operation
Press the SLEEP button, "SLEEP" disappears from the display. The
timer is also released if the power is switched off.
-9-
" disappears from the display.
Hide quick links:
Advertisement
Table of Contents
