Table of Contents
Advertisement
Using the timer
(Main unit only)
Set the on and off times, and function to be used. Operation will start with
the selected function at the on time. The sound will be gradually
increased from a no-sound level to the current volume setting (fade-in).
The power will be switched off at the off time.
The timer will function every day unless it is released.
Preparation
Note:
Make absolutely sure that the clock is set to the correct time before
setting the timer.
-
Prepare the sources to be used.
-
If the function selected is tuner, tune in to the desired band and
station.
-
For tape deck: Tape playback will start in the forward direction.
-
Adjust the volume level as desired.
Operation
1. Press the FUNCTION button to select the function and set the
desired volume level for timer operation.
2. Press the CLOCK/TIMER button for at least 2 seconds.
The previous timer on time setting appears.
3. Press the MEMORY button within 10 seconds.
4. Set the timer on time by turning the VOLUME control, then press the
MEMORY button (as described under "ADJUDTING THE CLOCK").
The timer off time setting appears.
5. Set the timer off time as described in step 4.
The previous timer mode/function setting appears.
-
" " blinks only for tuner function, " " remains lit for other function.
6. Select the timer mode by turning the VOLUME control (Tuner
function only).
-
"
REC" and " " blink alternately. Select "
recording.
7. Press the MEMORY button (Tuner function only).
The original display returns, then the timer operation standby mode
is activted. " " or "
REC" remains lit.
8. Press the z/ON button to switch off the power.
-
To switch off the power during a timer controlled operation, press
the z/ON button. The timer will be set in the standby mode.
TIMER OPERATION
To release the timer
After turning the power on, press the CLOCK/TIMER button twice. " "
or "
To set the timer again with the same settings
1. Press the CLOCK/TIMER button repeatedly to display " " or "
2. Press the z/ON button to switch off the power.
Note:
The timer operation is released if a power failure occurs.
Using the sleep timer
The sleep timer automatically switches off the power after a preset time
has elapsed. The volume will gradually be reduced (fade-out) during the
1-minute period before the unit turns off. There are 12 time periods
available: 120, 110, 100, 90, 80, 70, 60, 50, 40, 30, 20, and 10 minutes.
Press the SLEEP button repeatedly to select the desired sleep time.
"SLEEP" blinks and the selected time appears on the display. After a few
seconds, the original display returns. "SLEEP" remains blinking.
To check the remaining sleep time
Press the SLEEP button once. After a few seconds, the original display
returns.
To release the sleep timer while in operation
Press the SLEEP button repeatedly until "SLEEP" disappears. The
timer is also released if the power is switched off.
REC" for unattention
-9-
REC" disappears.
REC".
(Remote control only)
Hide quick links:
Advertisement
Table of Contents
