Maintenance; Specifications - Sanyo DTA-200 Instruction Manual

Cleaning the cabinet
Use a clean soft cloth moistened with plain lukewarm water and wrung
dry. Never use benzol, benzene or other strong chemical cleaners since
these could damage the finish of your unit. It is important that no liquid
reaches the inside of the unit.
Tuner
Reception frequency:
FM: 87.5 - 108 MHz (50 kHz step)
87.9 - 107.9 MHz (200 kHz step)
AM: 522 -1611 kHz (9 kHz step)
520 - 1710 kHz (10 kHz step)
CD player
Channels:
2-channel stereo
Sampling frequency:
44.1 kHz
Pick-up:
Optical 3-beam semiconductor laser
Laser output:
0.6 mW (Continuous wave max.)
Wave length:
790 nm
Wow/flutter:
Below measurable limits

MAINTENANCE

Cleaning the CD player lens
The lens should never be touched.
If dust is on the lens, blow if off us-
ing a camera lens blower. (Consult
your dealer.)

SPECIFICATIONS

General
Output power:
5 W x 2 (at 3 ohms, 10% distortion)
Input
VIDEO IN: 400 mV/50k ohms
Outputs
SPEAKERS: 3 ohms
PHONES: 8 - 32 ohms
Power requirements:
AC 230 V, 50 Hz
Power consumption:
36 W
Dimensions:
168(W) x 323(H) x 99(D) mm
Weight:
2.2 kg
Speaker systems
Type:
Full range bass reflex
Unit used:
8 cm cone type
Maximum power-handling capacity:
16 W (peak)
Nominal impedance:
3 ohms
Dimensions:
191(W) x 292(H) x 89(D) mm
Weight:
108 g (per speaker)
Specifications subject to change without notice.
-10-