Download  Print this page

Sanyo DMP-P690 Instruction Manual

Dual dock music system for ipod and iphone
Hide thumbs


Quick Links

Dual Dock Music System for iPod and iPhone
Made for iPod , and Made for iPhone , mean that an electronic accessory has been designed to connect specifically to iPod or iPhone,
respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of
this device or its compliance with safety and regulatory standards.
iPhone, iPod are trademarks of Apple Inc.,
registered in the U.S. and other countries.
iPhone, iPod shown are not included.
DMP- 690



  Summary of Contents for Sanyo DMP-P690

  • Page 1 INSTRUCTION MANUAL DMP- 690 Dual Dock Music System for iPod and iPhone iPhone, iPod are trademarks of Apple Inc., registered in the U.S. and other countries. iPhone, iPod shown are not included. “ Made for iPod , and Made for iPhone , mean that an electronic accessory has been designed to connect specifically to iPod or iPhone, ”...
  • Page 2: Table Of Contents

    THE UNIT SUPPORTS THE LISTED iPods / iPhones ..........29 INTRODUCTION Thank-you for choosing SANYO. This very compact digital music system comes with dual playing and charge your iPhone/iPod. It also has an AM/FM stereo digital tuner with 40 presets, dual alarm clock function with wake to iPhone/iPod/radio/buzzer, backlit LCD display with six level dimmer control, two 2.0”...
  • Page 3: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Follow all instructions. Heed all warnings. Install this unit in accordance with the manufacturer’s instructions. Only use attachments / accessories specified by the manufacturer. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the unit.
  • Page 4 IMPORTANT SAFETY INSTRUCTIONS 21.) Do not destruct the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety.
  • Page 5: Preparation For Use

    PREPARATION FOR USE Unpacking And Set Up • Remove the main unit, the AC adaptor, the 6 iPod adaptors and the external AM loop antenna from the carton, and remove all packing material from the main unit. We recommend that you save the carton and packing material in the event that the unit ever needs to be returned for service.
  • Page 6: Battery Back-Up System

    BATTERY BACK-UP SYSTEM This system includes a battery back-up circuit that will maintain the time and alarm settings, and the preset tuner memories, in the event of a temporary power interruption. The battery back-up system requires two “AAA”(UM-4) batteries(not included). If the back-up battery is not installed, or the battery is exhausted, and the AC power supply is interrupted, the time, alarm, and preset memory stations will be lost.
  • Page 7 BATTERY BACK-UP SYSTEM Battery Precautions Follow these precautions when using a battery in this device. 1. Warning - Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type 2. Use only the size and type of battery specified. 3.
  • Page 8: Location Of Controls & Indicators

  • Page 9 LOCATION OF CONTROLS & INDICATORS LCD DISPLAY Wake To Indicator; iPod, Radio, Buzzer. AUX / Radio Frequency / Volume / Left iPod Indicator EQ / DBBS Indicator Alarm 1 / 2 ‘On’ FM / AM Indicator Indicator Right iPod Indicator Daylight Savings Time STEREO...
  • Page 10: Remote Control

    REMOTE CONTROL Remote Control Transmitter STANDBY / ON Button SLEEP Button SNOOZE / DIMMER Button MODE Button PRESET / MENU - Button PRESET / MENU MENU Button TUNE / SKIP Button MENU ENTER Button 10. DOCK SELECT / TIME SYNC Button 11.
  • Page 11: Operating Instructions

    OPERATING INSTRUCTIONS Make sure that you have fully extended the FM antenna wire. Be sure to connect the external AM loop antenna to the AM ANT Jack on the back panel if you are planning to listen to AM radio stations (refer to page 15 for connection information) .
  • Page 12: Setting & Basic Operations

    SETTING & BASIC OPERATION Sensor-Touch Control Information All of the controls on the top panel of the main unit, with the exception of the STANDBY / ON control, are special ‘Sensor-Touch’ controls. There are no buttons to push’. When you softly touch one of these ‘buttons’, it will flash 3 times to confirm it understood the command, and then the system will react accordingly.
  • Page 13 SETTING & BASIC OPERATION Setting The Clock When the system is connected to the AC 240V 50Hz Outlet for the first time, “AM 12:00”will flash on the display. Important: Do not press the STANDBY/ON button to turn the system ‘On’. The clock can only be set when the system is in the Standby Mode.
  • Page 14 SETTING & BASIC OPERATION Volume Controls To increase or decrease the system volume, press the VOLUME button on the remote control or VOLUME + or - on the top panel. The Volume Level Indicator will appear on the display when you change the volume level. The level indicator ranges from “00”...
  • Page 15: Radio Operation

    RADIO OPERATION 1.) Press the STANDBY/ON button on the top panel or button on the remote control to turn the system ‘On’. The initial default mode for this system is the iPod function. The “iPod” indicator will flash above the time display. 2.) Touch the MODE button on the top panel or press the MODE on the remote control until a FM or AM frequency appears above the time display.
  • Page 16 RADIO OPERATION Hints For Better Reception FM: The FM lead wire antenna on the back panel should be extended to its full length. You may also have to vary the direction of this antenna until you find the position that provides the best reception. FM ANT AUX IN DC IN 10V...
  • Page 17: Presetting Stations In The Tuner Memory

    PRESETTING STATIONS IN THE TUNER MEMORY Up to 40 stations (20 AM / 20 FM) can be stored in the tuner memory for easy recall at any time. Use either the Automatic or Manual tuning methods described on page 14 to tune to the first station to be stored in memory.
  • Page 18 PRESETTING STATIONS IN THE TUNER MEMORY Recalling Preset Stations Simply press the PRESET / MENU + or - buttons on the remote control or touch the ALM2 / PRESET + or ALM1 / PRESET - button on the top panel to scroll forward or backward through the preset station memories.
  • Page 19: Sleep Timer

    SLEEP TIMER This system includes a programmable Sleep Timer that allows you to fall asleep to between 10 and 120 minutes of music and then turns the unit to standby automatically. To operate the sleep timer: 1.) Turn the system ‘On’ and operate the TUNER function as usual. 2.) Press the SLEEP button on the remote control or touch the SLEEP control on the top panel.
  • Page 20: Alarm Setting

    ALARM SETTING NOTES: • Use the remote control, you can set the alarms in standby mode or operation mode. (The ALM1 / PRESET - and ALM2 / PRESET + on the top panel can only be set when the system is in the standby mode.) •...
  • Page 21 ALARM SETTING 8). At the selected wake-up time the system will turn on to the mode you selected. The alarm will continue for 1 hour and then shut off automatically and reset itself for the same time on the following day. Note: If you selected the wake to iPod mode but there is no iPod docked at the wake up time, the system will default to the wake to Buzzer mode automatically.
  • Page 22: Ipod/Iphone Operation

    OPERATION This SANYO system includes two docking station so that you can dock and charge two separate iPod or iPhone models, or one iPod and one iPhone model simultaneously. Since this model is ‘Works With iPhone’ certified it is not necessary to place your iPhone in the Airplane mode to avoid audio interference.
  • Page 23 iPod/iPhone OPERATION Choosing The Correct Adaptor When connecting an iPod / iPhone to this iPod Dock, please ensure that the correct adaptor plate is used. FAILURE TO DO SO MAY RESULT IN DAMAGE TO THE iPod / iPhone. The iPod dock comes with 6 removable dock adaptors. Using the correct adaptor ensures the proper fit for your iPod / iPhone and helps to reduce the stress on the connector when operating the iPod / iPhone.
  • Page 24 iPod/iPhone OPERATION TIME SYNC Control To set the time on your Main Unit Clock Radio, first dock your iPod or your iPhone device. Then, press and hold the DOCK SEL / TIME SYNC button on the remote control or touching and hold the DOCK SELECT / TIME SNYC.
  • Page 25: Dock Adaptor Compatibility

    DOCK ADAPTOR COMPATIBILITY 3G iPhone 16GB 16GB 3GS iPhone 32GB iPhone 16GB 1G/2G iPod touch 16GB 32GB 4G/5G nano 16GB iPod nano 5G iPod 4G iPod 3G iPod iPod mini iPod classic 120GB 160GB iPod photo...
  • Page 26: Ipod/Iphone Operation Controls

    iPod/iPhone OPERATION CONTROLS (Play/Pause) – touch this area on the top panel or press this button on the remote control to begin playback on your iPod/iPhone. Press again to Pause playback. TUNE/SKIP buttons on the Main Unit – During playback press to skip forward or backward to the next or previous track.
  • Page 27 iPod/iPhone OPERATION CONTROLS 5.) The MENU button on the remote control works the same way as the MENU button on your iPod. Press the MENU button repeatedly to access the Main Menu of your iPod. Press the + / - buttons on the remote control to navigate Up or Down through the displayed Menu list.
  • Page 28: Troubleshooting Guide

    TROUBLESHOOTING GUIDE Symptom Possible Cause Soluti on Radio Station not tuned properly Retune FM or AM broadcast Noise or sound for FM or AM. station. distorted on FM or AM broadcasts FM: Wire aerial is not Extend FM wire aerial. positioned correctly.
  • Page 29: Technical Specification

    TECHNICAL SPECIFICATION 1. General Power requirements AC Adaptor Input: AC 100-240V ~ 50/60Hz Output: DC 10V 2.4A Main unit backup 2 AAA (UM-4)batteries (Purchase separately) Power consumption Dimensions of main unit 295mm(L) x 186mm(W) x 85mm(H) Weight of main unit Approx.
  • Page 30: The Unit Supports The Listed Ipods/Iphones

    THE UNIT SUPPORTS THE LISTED iPods/iPhones *iPods/iPhones charge and operation only* ***iPods/iPhones shown are not included*** iPod with color iPod mini iPod display (4GB,6GB only) (4th generation) (4th generation) (20GB,40GB only) (20GB,30GB,40GB, 60GB only) iPod with video iPod nano iPod nano (5th generation) (1st generation) (2nd generation)
  • Page 31 CODE NO.: 116421166 Printed in China...