Table Of Contents; Features - Denon DVD-2910 Operating Instructions Manual

ENGLISH
IMPORTANT TO SAFETY
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
CAUTION:
1. Handle the power supply cord carefully
Do not damage or deform the power supply cord.
If it is damaged or deformed, it may cause electric
shock or malfunction when used. When removing
from wall outlet, be sure to remove by holding the
plug attachment and not by pulling the cord.
2. Do not open the top cover
In order to prevent electric shock, do not open the
top cover.
If problems occur, contact your DENON DEALER.
3. Do not place anything inside
Do not place metal objects or spill liquid inside the
DVD audio-video/Super audio CD player.
Electric shock or malfunction may result.
Please, record and retain the Model name and serial
number of your set shown on the rating label.
Model No. DVD-2910 Serial No.
NOTE:
This DVD audio-video/Super audio CD player uses the
semiconductor laser. To allow you to enjoy music at a
stable operation, it is recommended to use this in a
room of 10°C (50°F) ~ 35°C (95°F).
Copyrights
It is prohibited by law to reproduce, broadcast, rent
2
or play discs in public without the consent of the
copyright holder.
• ACCESSORIES
Please check to make sure the following items are included with the main unit in the carton:
q Audio/Video cord .......................................1
w AC cord ...................................................1
e Remote control unit (RC-985) ........................1
q w
4

- TABLE OF CONTENTS -

z
Features ...........................................................4, 5
x
Discs ....................................................................5
c
Cautions on Handling Discs .................................6
v
Connections...................................................6~10
b
Part Names and Functions...........................11, 12
n
Remote Control Unit ....................................12, 13
m
Loading Discs.....................................................13
,
Changing the Default Settings.....................14~23
.
Using the Pure Direct Mode ..............................24
⁄0
Using the Super Audio CD Setup.......................24
⁄1
Adjusting the Picture Quality .......................24~26
⁄2
Using the Video Setup .......................................26
⁄3
Playback.......................................................27~29
⁄4
Playing Repeatedly.......................................29, 30
⁄5
Playing Tracks in the Desired Order...................30
⁄6
Playing Tracks in the Random Order..................31
⁄7
Using the On-screen Display .............................31
⁄8
Using the Multiple Audio,
Subtitle and Angle Functions .......................32, 33
⁄9
Using the Menus .........................................33, 34
¤0
Marking Scenes You Want to See Again ...........34
¤1
Playing in the Zoom Mode .................................35
¤2
Playing MP3 .................................................35, 36
¤3
Playing WMA .....................................................36
¤4
Playing Still Picture Files (JPEG Format) ......37, 38
¤5
Troubleshooting ...........................................38, 39
¤6
Main Specifications............................................39
r R6P/AA batteries .......................................2
t Operating instructions .................................1
y Service station list.......................................1
e r
1

FEATURES

1. Digital transfer connectors
Digital transfer of video signals is possible by
connecting an HDCP compatible display device
equipped with one of the connectors below using
a special cable.
When playing DVD AUDIO with CPPM, the video
signal cannot be output, and then the audio signal
cannot be output from the HDMI connector too.
(1) HDMI connector
Digital video signals are transferred in color
space (Y/Cb/Cr) or RGB.
The audio signals can be transferred
simultaneously, so both audio and video
signals can be transferred with a single cable.
(2) DVI-D connector
Digital video signals are transferred in RGB.
2. Super Audio CD multi-channel playback
compatibility
In addition to playing DVD audio and video discs,
the DVD-2910 can play multi-channel Super Audio
CDs with a playback frequency range covering 100
kHz and a dynamic range of 120 dB or greater
within the audible frequency range, and a
maximum of 5.1 channels can be output.
3. High precision 24-bit D/A converter
The audio playback circuit includes an advanced
segment type D/A converter with the high
technical specifications in the business,
manufactured by Burr-Brown, a company with an
established reputation for D/A converters. This
high performance D/A converter allows not only
input of the 24-bit/192 kHz data of DVD-Audio
discs, it also includes an analog pure FIR filter for
ideal DSD playback of Super Audio CDs.
Furthermore, the same DAC is used unsparingly
for the front, the surround, center and LFE
channels to provide optimum sound quality during
multi-channel playback as well.
4. HDCD ® (High Definition Compatible Digital ® )
decoder (NOTE 1)
HDCD is an encoding/decoding technology that
greatly reduces the distortion occurring at the time
of digital recording while maintaining compatibility
with the conventional CD format. HDCD allows 24-
bit data to be converted into the 16-bit data of
current CDs with no loss in sound quality.
The use of this HDCD decoder makes it possible
to achieve the high resolution and low distortion
characteristic of HDCD when playing HDCD-
compatible discs, and DENON's digital technology
optimizes the high sound quality possibilities of
HDCD technology. Furthermore, normal CDs and
HDCD-compatible CDs are automatically identified,
and the optimum digital signal processing for that
type of disc is used.
5. Dolby/Digital DTS decoder (NOTES 2, 3)
The DVD-2910 is equipped with a built-in Dolby
Digital/DTS decoder, allowing you to recreate the
atmosphere of a movie theater or concert hall
when using the DVD-2910 in combination with an
AV amplifier and speakers.
6. Progressive Scan circuit "DCDi TM " (NOTE 4)
The DVD-2910 is equipped with a high precision
Progressive Scan circuit "DCDi™" allowing it to
reproduce movies and other images on DVDs with
a quality near that of the original.
7. 12-bit/216 MHz video D/A converter (NOTE 5)
The DVD-2910 uses a video D/A converter that
conducts D/A conversion of all video signals at 12
bits and allows 8X oversampling in the progressive
mode to achieve the high quality picture that DVDs
are meant to provide. In addition, NSV technology
reduces noise upon D/A conversion.
8. Thorough vibration-resistant design
(1) The pickup mechanism is positioned at the
center to reduce the effects of external
vibrations.
(2) A low center of gravity make for a low
vibration design.