Making The Initial Settings; Table Of Initial Settings - Denon DVD-3930CI Operating Instructions Manual

ENGLISH

Making the initial settings

Table of initial settings

Language setting
Digital interface settings
Video setting
Description
DIALOG Set the audio language to be output.
SUB TITLE Sets the language of the subtitles displayed on the TV screen.
DISC MENUS
Sets the language of the menus (top menu, etc.), recorded on the disc.
Sets the language of the initial settings screen and the messages
OSD LANGUAGE
displayed on the TV screen ("PLAY", etc.).
Description
HDMI RGB Use this procedure to set the digital RGB image range (data range)
SETTING
output from the HDMI terminal.
Use this procedure to set the audio signals output from the HDMI
terminal.
The properties and components of the
SPEAKER
different channels are set automatically
CONFIGURATION
for the combination of speakers being
HDMI
used.
SPEAKER
HDMI AUDIO
SETUP Set the volume of the different
SETUP
(Can only be CHANNEL speakers so that the test tones output
set when LEVEL from them sound to have the same
"MULTI volume.
(LPCM)" is
selected) This is a parameter for optimizing the
timing at which the sound is output from
DELAY TIME
the speakers and subwoofer according to
their distance from the listening position.
HDMI AUTO Use this procedure to make the settings for the "AUTO" function
FORMAT selected with the HDMI FORMAT button on the remote control unit.
Set the DENON LINK terminal's output according to the DENON
DENON LINK
LINK version of the connected AV amplifier.
Description
TV ASPECT Set this according to the screen of the connected TV.
TV TYPE Set this according to the video format of the connected TV.
COMPONENT Use this procedure to set the DVD-3930CI's component video
VIDEO OUT output format.
AUDIO / VIDEO
Set the video output to synchronize the audio signal.
SYNC
Use this procedure to set the output picture when "WIDE (16:9)" is
SQUEEZE MODE
selected at "TV ASPECT".
PROGRESSIVE
Sets the optimum progressive mode for the image material.
MODE
PIXEL
Set the horizontal display range with respect to the interlaced output.
CROPPING
Item you want to set (* indicates the setting upon purchase)
ENGLISH*
OFF* ENGLISH
ENGLISH*
ENGLISH*
Item you want to set (* indicates the setting upon purchase)
NORMAL*
2CH*
FRONT SP CENTER SP
LARGE* / LARGE* / SMALL
SMALL / (NONE)
TEST TONE FRONT LCH
OFF / AUTO /
MANUAL
FRONT
DISTANCE
LCH
METERS /
FEET* (0 ~ 18m (3.6m*))
PANEL RES.*
OFF*
Item you want to set (* indicates the setting upon purchase)
4:3 PS
NTSC
PROGRESSIVE*
PROGRESSIVE*
OFF*
AUTO*
13
ENGLISH
FRENCH SPANISH GERMAN JAPANESE
FRENCH SPANISH GERMAN JAPANESE
FRENCH SPANISH GERMAN JAPANESE
FRANÇAIS ESPAÑOL
ENHANCED
MULTI (NORMAL) MULTI (LPCM)
SUBWOOFER SURROUND SP CROSSOVER
LARGE* / SMALL
YES* / (NO) 40 / 60 / 80* / 100 / 120Hz
/ (NONE)
SURROUND SURROUND
CENTER FRONT RCH
RCH LCH
0 ~ –10dB (0dB*)
FRONT SURROUND SURROUND
CENTER SUBWOOFER
RCH LCH RCH
0 ~ 60ft (12ft*) 0 ~ 60ft (10ft*) 0 ~ 60ft (12ft*)
(0 ~ 18m (3.0m*)) (0 ~ 18m (3.6m*))
MAX RES.
2nd 3rd
4:3 LB WIDE (16:9)*
PAL MULTI*
INTERLACED
INTERLACED HDMI OTHERS
ON AUTO
VIDEO1 VIDEO2
OFF* ON
Page
OTHERS 16
OTHERS 16
OTHERS
16
16
Page
17
17
17, 18
SUBWOOFER
18
DEFAULT
19
ON
19
19
Page
20
20
20
21
21
21, 22
22