Denon DVD-2910 Operating Instructions Manual

Denon DVD-2910 Operating Instructions Manual

Denon operating instructions dvd audio-video/super audio cd player dvd-2910, dvd-955
Hide thumbs Also See for DVD-2910:

Advertisement

DVD AUDIO-VIDEO/SUPER AUDIO CD PLAYER
DVD-2910/955
OPERATING INSTRUCTIONS
ON / STANDBY
FOR ENGLISH READERS
PLAY
STOP
OPEN/CLOSE
STILL / PAUSE
SUPER
PURE
HDMI / DVI
AUDIO CD
DIRECT
SELECT
SELECT
FORMAT
SETUP
DVD-2910
DVD AUDIO-VIDEO / SUPER AUDIO CD PLAYER
PAGE
006 ~ PAGE
075
POWER OFF
POWER ON
HDMI/DVI
OPEN/
NTSC/PAL
SELECT
FORMAT
CLOSE
SUPER AUDIO
CD SETUP
PROGRAM
/DIRECT
CLEAR
SEARCH MODE
CALL
ANGLE
SUBTITLE
AUDIO
TOP MENU
DISPLAY
MENU
RETURN
STOP
STILL/PAUSE
PLAY
SKIP
SLOW/SEARCH
REPEAT
A-B
PAGE
RANDOM
MARKER
ZOOM
DIMMER
PICTURE
PURE DIRECT
SETUP
ADJUST
MEMORY
SELECT
RC-985

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DVD-2910 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Denon DVD-2910

  • Page 1 DVD AUDIO-VIDEO/SUPER AUDIO CD PLAYER DVD-2910/955 OPERATING INSTRUCTIONS ON / STANDBY FOR ENGLISH READERS POWER OFF HDMI/DVI SELECT TOP MENU MENU STOP SKIP REPEAT PLAY STOP OPEN/CLOSE RANDOM SETUP STILL / PAUSE SUPER PURE HDMI / DVI AUDIO CD DIRECT...
  • Page 2: Important To Safety

    2. IMPORTANT NOTICE: DO NOT MODIFY THIS PRODUCT This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modification not expressly approved by DENON may void your authority, granted by the FCC, to use the product. 3. NOTE This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
  • Page 3: Front/Rear Panel View

    PANEL TRASERO @0 @2 !9 @1 !1 ! 2 !3 !4 !5 !6 !7 PLAY STOP OPEN/CLOSE STILL / PAUSE SUPER PURE AUDIO CD DIRECT HDMI / DVI SETUP SELECT SELECT FORMAT DVD-2910 DVD AUDIO-VIDEO / SUPER AUDIO CD PLAYER...
  • Page 4: Safety Instructions

    Read Instructions – All the safety and operating instructions should be read before the product is operated. Retain Instructions – The safety and operating instructions should be retained for future reference. Heed Warnings – All warnings on the product and in the operating instructions should be adhered to.
  • Page 5 NOTE ON USE / OBSERVATIONS RELATIVES A L’UTILISATION / NOTAS SOBRE EL USO • Avoid high temperatures. Allow for sufficient heat dispersion when installed on a rack. • Eviter des températures élevées. Tenir compte d’une dispersion de chaleur suffisante lors de l’installation sur une étagère.
  • Page 6: Table Of Contents

    ENGLISH Features...6, 7 Discs ...8 Cautions on Handling Discs...9 Connections ...10 ~ 17 Part Names and Functions ...18, 19 Remote Control Unit...20, 21 Loading Discs ...22 Changing the Default Settings ...23 ~ 43 Using the Pure Direct Mode...43, 44 ⁄0 Using the Super Audio CD Setup ...44 ⁄1 Adjusting the Picture Quality ...45 ~ 48...
  • Page 7 7. 12-bit/216 MHz video D/A converter (NOTE 5) The DVD-2910/955 uses a video D/A converter that conducts D/A conversion of all video signals at 12 bits and allows 8X oversampling in the progressive mode to achieve the high quality picture that DVDs are meant to provide.
  • Page 8: Discs

    ENGLISH 2 DISCS • The types of discs listed on the table below can be used on the DVD-2910/955. The marks are indicated on the disc labels or jackets. Usable Mark (logo) discs DVD video DVD audio (NOTE 1) DVD-R...
  • Page 9: Cautions On Handling Discs

    Only the discs including the marks shown on page 8 can be played on the DVD-2910/955. Note, however, that discs with special shapes (heart-shaped discs, hexagonal discs, etc.) cannot be played on the DVD-2910/955. Do not attempt to play such discs, as they may damage the player. Holding Discs Avoid touching the surface of discs when loading and unloading them.
  • Page 10: Connections

    (1) Connecting to a TV • Use the included audio video cord to connect the TV’s video input connector and audio input connectors to the DVD-2910/955’s VIDEO OUT or S-VIDEO OUT and AUDIO OUT.
  • Page 11 AUDIO IN NOTES: • Use the three commercially available video cords to connect the DVD-2910/955’s color component output connectors to the TV or monitor. • Set the “TV TYPE” in “VIDEO SETUP” in “SETUP” to comply with your TV’s video format. When the TV is NTSC formatted set to NTSC.
  • Page 12 (3) Connecting to a AV amplifier with a built-in decoder When DVDs recorded in Dolby Digital or DTS are played, Dolby Digital or DTS bitstream signals are output from the DVD player’s digital audio output connectors. If a Dolby Digital or DTS decoder is connected, you can achieve sound with the power and sense of presence of a movie theater or concert hall.
  • Page 13 2 Sound output from the DVD-2910/955’s digital audio output connectors In the case of bitstream output Audio recording format Dolby Digital DVD video In the case of PCM output Audio recording format 48 kHz / 16 ~ 24 bit DVD video...
  • Page 14 “SPEAKER CONFIGURATION”, “CHANNEL LEVEL” and “DELAY TIME” settings. (See pages 34 ~ 38.) • With the DVD-2910/955, we recommend turning the digital output off by using the PURE DIRECT MODE and only outputting analog signals in order to keep interference from the digital output circuitry to a minimum and allow you to enjoy high-quality multi-channel sound thanks to the high-bit, high sampling frequency.
  • Page 15: Connecting To A Stereo Component

    “LPCM (44.1kHz/48kHz)” → “ON” Playing DVDs with incorrect settings may result noise that could damage your ears or the speakers. DVD-2910/955 NOTE: • Digital audio signals cannot be output when playing Super Audio CDs. Use analog connections to record Super Audio CDs.
  • Page 16 MULTI (LPCM), a down-mixed audio signal is only output from the analog connectors (Left/Right and Front Left/Front Right) of the DVD-2910/955. To output multi-channel sound from the analog audio output connectors, set HDMI to OFF, or select 2CH. • When the HDMI audio setting is set to multi-channel, the “AUDIO CHANNEL”, “DIGITAL OUTPUT”, “LPCM (44.1...
  • Page 17: Dvi Connections

    Make an audio connection also because an audio signal will not be output from the DVI-D connector. Commercially-available DVI cables are available in 24-pin and 29-pin types. The DVD-2910/955 supports the 24-pin DVI-D cable, but the 29-pin DVI cable cannot be connected.
  • Page 18: Part Names And Functions

    ENGLISH 5 PART NAMES AND FUNCTIONS (1) Front Panel See page 3. Power ON/STANDBY button • Press once to set to the standby mode. The indicator lights up in red. • Press again to turn the power on. The indicator lights up in green.
  • Page 19 • Digital data is output from this connector. Control output connector (ROOM TO ROOM/OUT) • This is the output connector for wired remote control. Consult your DENON dealer if you wish to use this connector. Control input connector (ROOM TO ROOM/IN) •...
  • Page 20: Remote Control Unit

    ENGLISH 6 REMOTE CONTROL UNIT 2 The DVD-2910/955 can be controlled from a distance using the included remote control unit (RC-985). (1) Inserting Batteries q Remove the remote control unit’s rear cover. w Place two R6P/AA batteries in the battery compartment in the direction indicated by the marks.
  • Page 21 (3) Names and Functions of Remote Control Unit Buttons 2 Button not explained here function in the same way as the corresponding buttons on the main unit. POWER OFF POWER ON HDMI/DVI OPEN/ NTSC/PAL SELECT FORMAT CLOSE SUPER AUDIO CD SETUP PROGRAM /DIRECT CLEAR...
  • Page 22: Loading Discs

    Inner disc guide (8 cm disc) Disc tray NOTE: • Do not move the DVD-2910/955 while a disc is playing. Doing so may scratch the disc. (1) Opening and Closing the Disc Tray q Turn on the power. w Press the OPEN/CLOSE button.
  • Page 23: Changing The Default Settings

    DIGITAL INTERFACE SETUP Use this to set the output of DVI and HDMI terminals. VIDEO SETUP Use this to set the DVD-2910/955’s screen mode. (TV aspect and TV type.) AUDIO SETUP Use this to set the DVD-2910/955’s audio output mode.
  • Page 24 ENGLISH Setup items for use Bold characters indicate factory defaults. LANGUAGE SETUP DIALOG ENGLISH FRENCH SPANISH GERMAN JAPANESE OTHERS SUBTITLE ENGLISH FRENCH SPANISH GERMAN JAPANESE OTHERS DISC MENUS ENGLISH FRENCH SPANISH GERMAN JAPANESE OTHERS OSD LANGUAGE ENGLISH FRANÇAIS ESPAÑOL DIGITAL INTERFACE SETUP HDMI/DVI NORMAL BLACK LEVEL...
  • Page 25 Bold characters indicate factory defaults. AUDIO SETUP AUDIO CHANNEL MULTI CHANNEL 2 CH(SRS OFF) 2 CH(SRS ON) DIGITAL OUTPUT NORMAL LPCM (44.1 kHz/48 kHz) SOURCE DIRECT BASS ENHANCER COMPRESSION SACD FILTER 50Hz 100kHz RATINGS 0(LOCK ALL) RATING LEVEL 8(NO LIMIT) PASSWORD CHANGE OTHER SETUP...
  • Page 26 ENGLISH When “LANGUAGE SETUP” is selected See page 23. Use the • and ª cursor buttons to select the desired setting, then press the ENTER button. DIALOG Use this to set the language of the sound output from the speakers. SUBTITLE Use this to set the language of the subtitles displayed on the TV.
  • Page 27 w When “SUBTITLE” is selected: OFF (Factory default) Select this if you do not want to display the subtitles. (For some discs it is not possible to turn off the subtitle display.) ENGLISH Select this when you want to play the DVD with the subtitles in English.
  • Page 28: Language Code List

    ENGLISH Language code list Code Language 6565 Afar 6566 Abkhazian 6570 Afrikaans 6577 Ameharic 6582 Arabic 6583 Assamese 6588 Aymara 6590 Azerbaijani 6665 Bashkir 6669 Byelorussian 6671 Bulgarian 6672 Bihari 6678 Bengali; Bangla 6679 Tibetan 6682 Breton 6765 Catalan 6779 Corsican 6783 Czech...
  • Page 29: Hdmi Audio Setup

    When “DIGITAL INTERFACE SETUP” is selected See page 23. Use the • and ª cursor buttons to select the desired setting, then press the ENTER button. HDMI/DVI BLACK LEVEL Switches the digital RGB video level (data range) of the HDMI and the DVI-D terminals.
  • Page 30 ENGLISH w When “HDMI AUDIO SETUP” is selected: 2CH (Channel) (Factory default) The audio signals are output from the HDMI terminal with a down- mixed to 2 channel. MULTI(NORMAL) The multi-channel audio signals are output from the HDMI terminal with a bit-stream. MULTI(LPCM) The multi-channel audio signals are output from the HDMI terminal with a linear PCM.
  • Page 31 B When “DELAY TIME” is selected: With 5.1-channel surround sound, ideally the distance between the listening position and all the speakers aside from the subwoofer should be the same. The delay time setting can be used to make the sound from the different speakers reach the listening position at the same time.
  • Page 32: Video Out

    ENGLISH When “VIDEO SETUP” is selected See page 23. Use the • and ª cursor buttons to select the desired setting, then press the ENTER button. TV ASPECT Use this to set the shape of your TV’s screen. TV TYPE Use this to set your TV’s video format (NTSC, PAL or MULTI).
  • Page 33 PROGRESSIVE (Factory default) Select this when using the DVD-2910/955 connected to a progressive type TV. INTERLACED Select this when using the DVD-2910/955 connected to an interlace type TV. NOTE: • For the component output only, it is possible to switch between interlace image output and progressive image output.
  • Page 34 ENGLISH When “AUDIO SETUP” is selected See page 23. Use the • and ª cursor buttons to select the desired setting, then press the ENTER button. AUDIO CHANNEL Use this to adjust for the connected speaker systems. DIGITAL OUTPUT Use this to select the digital output’s signal format. LPCM (44.1 kHz/48 kHz) Use this to set the digital audio output when playing DVDs recorded in linear PCM audio.
  • Page 35 B When “MULTI CHANNEL” is selected, use the • and ª cursor buttons to select the item to be set, then press the ENTER button. SPEAKER CONFIGURATION Use this to select the types of the different speakers. CHANNEL LEVEL Use this to adjust the output level of the different speakers. DELAY TIME Use this to set the distance from the different speakers to the listening position.
  • Page 36 ENGLISH B When “DELAY TIME” is selected: With 5.1-channel surround sound, ideally the distance between the listening position and all the speakers aside from the subwoofer should be the same. The delay time setting can be used to make the sound from the different speakers reach the listening position at the same time.
  • Page 37 w When “DIGITAL OUTPUT” is selected: NORMAL (Factory default) When playing DVDs recorded in Dolby Digital or DTS, bitstream signals are output from the digital audio output terminals. When playing DVDs recorded in linear PCM or packed PCM, linear PCM signals are output. Select “NORMAL”...
  • Page 38 ENGLISH y When “COMPRESSION” is selected: OFF (Factory default) Select this for the standard range. Select this to achieve powerful sound even when the volume is low. This setting is suited for watching DVDs late at night with the volume low.(This setting is only valid for DVDs recorder in Dolby Digital.) u When “SACD (Super Audio CD) FILTER”...
  • Page 39: Rating Level

    When “RATINGS” is selected See page 23. Use the • and ª cursor buttons to select the desired setting, then press the ENTER button. RATING LEVEL Use this to restrict playback of adult DVDs you do not want children to view. Note that even with adult DVDs, viewing cannot be restricted unless the restriction level is recorded on the disc.
  • Page 40 ENGLISH Use the number buttons to input a 4-digit password, then press the ENTER button. The default password is “0000”. Do not forget the password. The setting cannot be changed without inputting the correct password. w When “PASSWORD” is selected: Use the cursor button to select the “CHANGE”, then press the ENTER button.
  • Page 41 When “OTHER SETUP” is selected See page 23. Use the • and ª cursor buttons to select the desired setting, then press the ENTER button. PLAYER MODE The DVD video play mode can be set to play the DVD video contents included on a DVD audio disc.
  • Page 42 When “AUTO POWER MODE” is selected: OFF (Factory default) The power does not automatically switch to the standby mode. The DVD-2910/955’s power turns off and the standby mode is set if the DVD-2910/955 remains in the stop mode for approximately 30 minutes.
  • Page 43: Using The Pure Direct Mode

    English captions cannot be displayed when playing DVDs which do not contain caption signals. • The characters in which the captions are displayed (capital letters, small letters, italics, etc.) depend on the DVD and cannot be selected with the DVD-2910/955. 9 USING THE PURE DIRECT MODE 2 In the pure direct mode, only analog audio signals (no video signals, etc.) are output, thereby achieving high quality sound.
  • Page 44: Using The Super Audio Cd Setup

    ENGLISH Press the PURE DIRECT SELECT button on the main unit. The modes described below will appear on the display. NORMAL : All signals are output normally. MODE 1 : The settings stored for MODE 1 are used. The factory default settings are: “DIGITAL OUT”: “ON”...
  • Page 45: Adjusting The Picture Quality

    11 ADJUSTING THE PICTURE QUALITY Press the PICTURE ADJUST button during playback or during pause. • The image quality adjustment screen will appear. Returns the settings to the factory default settings. M1 TO M5 Image quality settings that have been adjusted to your preference can be stored to 5 memories, M1 to M5.
  • Page 46 ENGLISH SHARPNESS (HI) (–6 to +6) (Factory default: 0) • This adjusts the sharpness of the image for the high frequencies. (Only effective for progressive images.) HUE (–6 to +6) (Factory default: 0) • This adjusts the balance between green and red. (Not effective for progressive scan output nor component output.) CCS (0 to +3) (Factory default: 0)
  • Page 47 REFERENCE: • In the Graph of Gamma correction, the horizontal axis indicates the brightness level of the image that is recorded on the disc, and the vertical axis indicates the brightness level of the image when it is output from this unit. MEMORY 1 GO : 0 2 4 •...
  • Page 48 ENGLISH To exit the picture adjust mode Press the PICTURE ADJUST button. PICTURE MODE STD(STANDARD) M1(MEMORY1) M2(MEMORY2) M3(MEMORY3) M4(MEMORY4) M5(MEMORY5) SET(PIC SETUP) CONTRAST 1(ADJUSTMENT 1) BRIGHTNESS SHARPNESS(MID) SHARPNESS(HI) WHITE LEVEL 2(ADJUSTMENT 2) CHROMA LEVEL CHROMA DELAY G0~G9 GAMMA SETUP LEVEL H.POSITION V.POSITION 1 Only effective for progressive scan.
  • Page 49: Using The Video Setup

    OPEN/CLOSE STILL / PAUSE SUPER PURE AUDIO CD DIRECT HDMI / DVI SETUP SELECT SELECT FORMAT DVD-2910 DVD AUDIO-VIDEO / SUPER AUDIO CD PLAYER HDMI / DVI SELECT FORMAT Main unit HDMI/DVI SELECT FORMAT Remote control unit HDMI / DVI...
  • Page 50: Playback

    OPEN/CLOSE STILL / PAUSE SUPER PURE AUDIO CD DIRECT HDMI / DVI SETUP SELECT SELECT FORMAT DVD-2910 DVD AUDIO-VIDEO / SUPER AUDIO CD PLAYER (Green) ON / STANDBY (Red) OPEN/CLOSE OPEN/CLOSE ON / STANDBY Main unit POWER ON Main unit...
  • Page 51 Press the PLAY button. • For many interactive DVDs and video CDs with playback control, a menu screen appears. In this case use the procedure in step 6 to select the desired item. Interactive DVDs are DVDs including multiple angles, stories, etc.
  • Page 52: Stopping Playback

    <Resume play memory function (DVD only)> • With the DVD-2910/955, when the STOP button is pressed, that position is stored in the memory. At this time, “ the PLAY button is pressed after pressing the STOP button, playback resumes from the position at which it was stopped.
  • Page 53: Skipping To The Beginning Of Chapters Or Tracks

    (5) Skipping to the Beginning of Chapters or Tracks Cueing using the SKIP buttons During playback, press one of the SKIP buttons on the main unit or the remote control unit. : Reverse direction (PREVIOUS) : Forward direction (NEXT) • A number of chapters or tracks equal to the number of times the button is pressed is skipped.
  • Page 54 ENGLISH (8) Selecting the still image (only for DVD-audios) During playback, press the PAGE + or PAGE – button on the remote control unit. • For DVD audio discs with still images, the desired image can be selected. • On some discs the image cannot be selected due to the intentions of the discs’...
  • Page 55: Playing Repeatedly

    14 PLAYING REPEATEDLY 2 Use this function to play your favourite audio or video sections repeatedly. Playing Repeatedly (Repeat Playback) In the play mode, press the REPEAT button. • The display on the TV screen switches each time the button is pressed, and the corresponding repeat play mode or normal playback mode is set.
  • Page 56 ENGLISH Playing a Certain Section Repeatedly (A-B Repeat Playback) During playback, press the A-B button. • This sets start point A. Press the A-B button again. • This sets end point B, and repeat playback of the A-B section starts. To return to normal playback: Press the A-B button until “A TO B CANCELED”...
  • Page 57: Playing Tracks In The Desired Order

    STOP OPEN/CLOSE STILL / PAUSE SUPER PURE AUDIO CD DIRECT HDMI / DVI SETUP SELECT SELECT FORMAT DVD-2910 DVD AUDIO-VIDEO / SUPER AUDIO CD PLAYER PROGRAM /DIRECT Remote control unit Remote control unit PLAY Main unit ENGLISH PROGRAM TRACK MODE...
  • Page 58: Playing Tracks In The Random Order

    STILL / PAUSE SUPER PURE AUDIO CD DIRECT HDMI / DVI SETUP SELECT SELECT FORMAT DVD-2910 DVD AUDIO-VIDEO / SUPER AUDIO CD PLAYER RANDOM Remote control unit PLAY Main unit SEARCH MODE Remote control unit for DVD audio discs RANDOM ON...
  • Page 59: Using The On-Screen Display

    17 USING THE ON-SCREEN DISPLAY 2 Use this function to display and change information on the disc (titles, chapters, time, etc.) In the play mode, press the DISPLAY button. • The On-Screen Display appears. • The picture on the TV screen switches each time the button is pressed. •...
  • Page 60: Using The Multiple Audio, Subtitle And Angle Functions

    ENGLISH 18 USING THE MULTIPLE AUDIO, SUBTITLE AND ANGLE FUNCTIONS Switching the Audio Language (Multiple Audio Function) 2 With DVDs containing multiple audio language signals, the audio language can be switched during playback. During playback, press the AUDIO button. • The current audio language number is displayed. Use the •...
  • Page 61: Switching The Subtitle Language (Multiple Subtitle Function)

    Switching the Subtitle Language (Multiple Subtitle Function) 2 With DVDs containing multiple subtitle language signals, the subtitle language can be switched during playback. During playback, press the SUBTITLE button. • The current subtitle language number is displayed. Use the • and ª cursor buttons to select the desired language. •...
  • Page 62: Switching The Angle

    ENGLISH Switching the Angle (Multiple Angle Function) 2 With DVDs containing multiple angle signals, the angle can be switched during playback. During playback, press the ANGLE button. • The current angle number is displayed. Use the • and ª cursor buttons to select the desired angle. •...
  • Page 63: Using The Menus

    19 USING THE MENUS Using the Top Menu 2 For DVDs containing multiple titles, the desired title can be selected and played from the top menu. During playback, press the TOP MENU button. • The top menu appears. Use the cursor or number buttons to select the desired title. •...
  • Page 64: Using The Dvd Menu

    ENGLISH Using the DVD Menu 2 Some DVDs include special menus called DVD menus. For example, DVDs with complex contents may contain guide menus, and DVDs with multiple languages may contain audio and subtitle language menus. These menus are called “DVD menus”. Here we describe the general procedure for using DVD menus.
  • Page 65: Marking Scenes You Want To See Again

    20 MARKING SCENES YOU WANT TO SEE AGAIN 2 Set marks at scenes you want to see again so that you can start playback from the marked position whenever you want. Setting Marks (DVD-AUDIO / DVD-VIDEO) During playback, press the MARKER button. •...
  • Page 66: Playing In The Zoom Mode

    ENGLISH 21 PLAYING IN THE ZOOM MODE In the play or pause mode, press the ZOOM button. • The zoom rate increases each time the ZOOM button is pressed. For DVD video discs and video CDs: OFF Æ x1.5 Æ x2 Æ x4 Æ OFF For DVD audio discs: OFF Æ...
  • Page 67: Playing Mp3

    2 There are many music distribution sites on the internet from which music files in MP3 format can be downloaded. Music downloaded as instructed on the site and written onto a CD-R/RW disc can be played on the DVD-2910/955. If music recorded on commercially available music CDs is converted on a computer into MP3 files using an MP3 encoder (conversion software), the data on a 12 cm CD is reduced into about 1/10 the amount of the original data.
  • Page 68 “normal” or “PCM”. The signals are output with the same sampling frequency as that of the music source. • In general, the higher an MP3 file’s bit rate, the better the sound quality. On the DVD-2910/955, we recommend using MP3 files recorded with bit rates of 128 kbps or greater.
  • Page 69: Playing Wma

    23 PLAYING WMA 2 Listening to WMA (Windows Media Audio) CD-R/CD-RW • This unit can play CD-R/RW music files that have been recorded in the WMA (Windows Media Audio)* audio compression format. Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries.
  • Page 70: Playing Still Picture Files (Jpeg Format)

    ENGLISH 24 PLAYING STILL PICTURE FILES (JPEG FORMAT) 2 JPEG files stored on Kodak picture CDs, Fujicolor CDs, CD-Rs and CD-RWs can be played as a slide show and enjoyed on the DVD-2910/955. Playing still picture 2 Kodak picture CDs and Fujifilm Fujicolor CDs can be played on the DVD-2910/955.
  • Page 71 Use the • and ª cursor buttons to select the folder containing the file(s) you want to play, then press the ENTER button. To change the folder Use the cursor button to select “ROOT”, then press the ENTER button. The screen in step 1 reappears.
  • Page 72 • TRACK REPEAT (the select WMA or MP3 or JPEG file is played repeatedly) NOTES: • The DVD-2910/955 is compatible with image data stored in JPEG format, but Denon does not guarantee that all image data stored in JPEG format can be viewed.
  • Page 73: Troubleshooting

    2 Are the amplifier and speakers operating properly ? If the DVD-2910/955 does not seem to be functioning properly, check the table below. If this does not solve the problem, the DVD- 2910/955 may be damaged. Turn off the power, unplug the power cord from the power outlet, and contact your store of purchase or nearest Denon sales office.
  • Page 74 • Check the HDMI/DVI connection.(Check the status of the HDMI/DVI-related indicators.) • Check whether the connected monitor equipment or other equipment supports HDCP. (The DVD-2910/955 will not output a video signal unless the other equipment supports HDCP.) • Check the settings of “HDMI/DVI SELECT”.
  • Page 75: Main Specifications

    26 MAIN SPECIFICATIONS Signal system: NTSC/PAL Applicable discs: (1) DVD-Audio/DVD-Video discs 1-layer 12 cm single-sided discs, 2-layer 12 cm single-sided discs, 2-layer 12 cm double-sided discs (1 layer per side) 1-layer 8 cm single-sided discs, 2-layer 8 cm single-sided discs, 2-layer 8 cm double-sided discs (1 layer per side) (2) Super audio CDs Single layer 12 cm discs, Dual layer 12 cm discs, Hybrid layer 12 cm discs...
  • Page 76 MEMO:...
  • Page 78 TOKYO, JAPAN www.denon.com Printed in China 511 4192 003...

This manual is also suitable for:

Dvd-955Dvd-955sDvd-2910b2910s

Table of Contents

Save PDF