Schwinn 20 Series Bike Assembly Manual page 14

Step 7: Mount the Console
Parts:
• #22 - Lower Pulse Wire (Qty 1)
• #24 - Lower Computer Wire (Qty 1)
• #31 - Front Post (Qty 1)
• #10 - Console (Qty 1)
• #9 - Pulse Wire Connector (Qty 1)
• #27 - Computer Wire Connector (Qty 1)
• #32 - Arc Washer (Qty 4)
• #16 - Hex Screw (Qty 4)
• #28 - Flat Head Phillips Screw (Qty 4)
Tools:
• Hex key L6
22
Figure 7
Assembly Steps
28
16
32
31
24
1
7-1: Feed Lower Pulse Wire (22) and Lower Computer
Wire (24) through the Front Post (31).
7-2: Install the Front Post (31) onto the Main Frame (1),
using 4 Hex Screws (16) and 4 Arc Washers (32).
7-3: Connect Lower Pulse Wire (22) to the Pulse Wire
Connector (9), and the Lower Computer Wire (24) to
the Computer Wire Connector (27).
Note: Push the wires gently into the Front Post.
7-4: Install the Console (10) to Front Post (31) using 4
Flat Head Phillips Screws (28) as shown in Figure
7A.
10
27
9
14
Assembly Manual
Do not cut or pinch the wires.
22
Figure 7 A
10
9
27
24
28