Precautions For Use; Operating Environment; Using The Unit Properly; Moving - Minolta CF 911 P Operator's Manual

Hide thumbs Also See for CF 911 P:
Table of Contents

Advertisement

2. Precautions for Use

Operating Environment

The operating environmental requirements of the printer are as follows.
Temperature
: 10°C to 30°C (50°F to 86°F) with a fluctuation of 10°C (50°F) per hour.
Humidity
: 25% to 85% with a fluctuation of 20% per hour.

Using the Unit Properly

To ensure the optimum performance of the unit, follow the precautions listed below.
N
NEVER place a heavy object on the unit or subject the unit to any shock.
N
NEVER open any Doors, or turn OFF the unit while it is printing.
N
NEVER bring any magnetized object or use flammable sprays near the unit.
N
NEVER modify the unit as a fire or electrical shock could result.
N
ALWAYS insert the Power Plug all the way into the outlet.
N
ALWAYS make sure that the outlet is visible, clear of the unit or unit cabinet.
N
ALWAYS provide good ventilation when producing a large number of continuous prints.
NOTE
= Locate the Printer in a Well Ventilated Room =
A negligible amount of ozone is generated during normal operation of this unit. An unpleasant odor
may, however, be created in poorly ventilated rooms during extensive unit operation. For a comfortable,
healthy, and safe operating environment, it is recommended that the room be well ventilated.
REMARQUE
= Placer le l'appareil dans une pièce largement ventilée =
Une quantité d'ozone négligeable est dégagée pendant le fonctionnement de l'appareil quand celui-ci
est utilisé normalement. Cependant, une odeur désagréable peut être ressentie dans les pièces dont
l'aération est insuffisante et lorsque une utilisation prolongée de l'appareil est effectuée. Pour avoir la
certitude de travailler dans un environnement réunissant des conditions de confort, santé et de
sécurité, il est préférable de bien aérer la pièce ou se trouve le l'appareil.

Moving

If you need to transport the unit over a long distance, consult your Technical Representative.

Care of Printer Supplies

Use the following precautions when handling the unit supplies (toner, paper, etc.).
N
Store the paper, toner and other supplies in a location free from direct sunlight and separate from any
heating apparatus. Keep these supplies in a dry, clean environment.
N
Store paper which has been removed from its wrapper but not loaded into the Drawer, in a sealed
plastic bag in a cool, dark place.
N
Keep supplies out of the reach of children.
N
If your hands become soiled with toner, wash them with soap and water immediately.
1-3

Advertisement

Table of Contents
loading

Table of Contents