Table of Contents
Advertisement
Changing the Paper Size for the
Middle Tray (Universal Tray)
Grasp the tab of the Edge Guide and slide it
1
to the size of the paper to be loaded. Pressing
the plastic part of the Trailing Edge Stop,
slide it to the size of the paper to be loaded.
NOTE
When loading A3 (11" ×17 ") paper:
Move the Trailing Edge Stop all the way to the
right. Then, pinch the Lever as shown and
remove it from the Stop. Next, fit the Lever into
position as shown.
When loading Inch size paper
Flip the Switch, located in the right rear
corner of the Tray, to "Inch".
1. When the Message "LOAD IN ANY TRAY" is displayed.
Large Capacity Cassette
Grasping the Door Lock Release Lever, open
1
the Cassette Door.
When adding paper to a partially loaded
Cassette, press the paper Plate Descent Key
to lower the Paper Plate before opening the
Cassette Door.
1144O023AA
Place the paper stack onto the Paper Plate so
2
that its front side faces up and close the
Cassette Door.
*This causes the Paper Plate to rise
automatically.
1138O044AA
NOTES
• Make sure that the leading edge of the paper
stack is pressed tightly up against the Guide
Plate on the take-up side of the Cassette.
• The paper should be loaded no higher than the
M (Max. Level Indicator).
• The Paper Plate may not ascend if the Cassette
Door is not closed completely. Be sure to close
the Door completely.
1138O606EA
6-3
1154O030AA
1154O031AA
1154O032AA
1145O555KA
1145O555A
Advertisement
Table of Contents
