Printer Malfunctions; The Printer Is Malfunctioning - Minolta CF 911 P Operator's Manual

2. Printer Malfunctions

The printer is malfunctioning.

Printer Condition
Printing cannot be performed
even if data is sent from the
computer.
The printer power is not supplied. Is the power cord disconnected
If these procedures do not correct the problem, contact your Technical Representative.
Check for:
There is some type of
malfunction.
Immediately after the main
switch is turned ON, the printer
remains in the warm-up mode.
The printer power is not supplied. Check the connection cable and
Are the printer port and protocol
parameters set correctly in the
network setup?
Is the printer driver set correctly? Check the name and settings of
from the wall outlet?
Is the breaker switched OFF for
the power that is supplied to the
printer?
Action
Perform the countermeasures
indicated by the messages on the
display panel.
After the main switch is turned
ON, it takes approximately nine
minutes until printing can be
performed. Please wait a moment.
connection conditions.
Check the network settings.
the printer driver that is used.
Plug the power cord securely into
the wall outlet.
Set the breaker to ON.
7-3