Operating The Setup Menu - Minolta CF 911 P Operator's Manual

Operating the Setup Menu

The Setup menu is accessed in the following sequence: Menu selection → Set key → Submenu
selection → Set key → Select the desired setting menu and change the setting.
Refer to the section "Setup Menu Transition Diagram" ( p. 4-11) for an illustration of the menu
hierarchy and the items that can be set.
(1) Use the M and L keys to select the main menu.
Setup
EXIT
M
Setup
Server Setup
M
Setup
Network Setup
M
(Next menu)
(2) Press the Set key. The submenu of the selected main menu (Level 1) is displayed. There may be no
submenu depending on the main menu that is selected and the setting items may be displayed
instead ( p. 4-11).
This example explains the condition when [Network Setup] is selected from the main menu.
Setup
Network Setup
If the Set key is pressed by mistake, press the Cancel key to return to the previous menu.
(3) Use the M and L keys to select the submenu (Level 1)
Network Setup
EXIT
M
Network Setup
Port Setup
M
Network Setup
Protocol Setup
M
(Next menu)
L
L
L
Set key
L
L
L
2. Setup Menu Procedures
Network Setup
EXIT
4-5