ProForm 470 Hr Elliptical User Manual page 8

10. Attach a Right Rear Pivot Cover (72) and a Right
Front Pivot Cover (73) around the right Handlebar
(6) and the Right Handlebar Leg (71) with six M4 x
1/2" Screws (49).
Repeat this step for the left Handlebar (6) and
the Left Handlebar Leg (5).
11. Make sure that all parts of the elliptical exerciser are properly tightened. Note: Some hardware may be
left over after assembly is completed. To protect the floor or carpet from damage, place a mat under the
elliptical exerciser.
10
6
49
72
49
5
8
6
49
73
49
71