Using The Playback Controls - Bosch Divar Operation Manual

Divar Control Center | Operation Manual | Finding recordings for playback
ATM/POS transactions
To view ATM/POS transaction data from a Divar it must have an ATM/POS
bridge unit and a license installed.
To view recorded transactions:
1. Click a cameo to select a particular camera.
2. Click the transaction icon .
> The transacton viewer window opens.
> The data associated with the selected camera is displayed in the viewer window.
Cameo information
The information line at the bottom of a normal-sized playback window shows
the date and time of the playback video.
The information line above the playback window shows the camera name and
contains an information icon if paused.
To see authenticity information about the current still image, click the
information icon in the cameo.
Bosch Security Systems

Using the playback controls

Play
Click Play to play forward streaming video in the playback window.
> The playback speed depends on the setting of the speed slider.
> Some frames may be dropped depending on the bandwidth of the connection
and the playback speed.
Play Reverse
Click Play rev to play streaming video in reverse in the playback window.
> The playback speed depends on the setting of the speed slider.
> Some frames may be dropped depending on the bandwidth of the connection
and the playback speed.
> When the beginning of a selection is reached, playback pauses. Click Play rev at
this position to continue playback in reverse outside the selection.
Playback Speed
The slider controls the speed of the continuous reverse and continuous forward
play. The All value means that no images are dropped at the fastest rate
provided by the system.
Still
Click Still to freeze the image.
> The last streamed image is shown as a still in the playback window.
Step forward
The step icon is only enabled in the still mode.
1. Click Step forward to advance the image one frame.
2. Hold it down to continue stepping.
EN | 16