Table of Contents
Advertisement
Switch Performance
The switches perform at:
❑
148,800 pps for 100 Mbps and 14,880 pps for 10 Mbps for full wire
speed forwarding and filtering
❑
200 Mbps maximum throughput in 100 Mbps, full-duplex mode
❑
20 Mbps maximum throughput in 10 Mbps, full-duplex mode
❑
Up to 8,192 unicast MAC addresses and unlimited multicast/
broadcast addresses
❑
280 kib bytes (per port) packet buffer
❑
Low latency 14.3 µs (64-byte packet, 100 Mbps full-duplex)
Note
For definitions of technical terms associated with Allied Telesyn
products, refer to the Glossary on Allied Telesyn's web site at
www.alliedtelesyn.com/support/gloss_a.htm.
AT-FS200 Series Installation Guide
7
Advertisement
Table of Contents
