Expansion Options - Allied Telesis AT-8600 Hardware Reference Manual

Hardware Reference
C613-03080-00 REV G

Expansion Options

Expansion modules increase switching capacity by providing two extra ports
and by allowing switches to be linked together in stacks. Use only the modules
in the following table.
Expansion Module
AT-A45/MT
AT-A45/5C
AT-A45/5C-SM15
AT-A46
AT-A47
AT-A65
For a current list of expansion modules or more information, contact your
authorised Allied Telesis distributor or reseller. You can also see these
documents:
AT-A65 Expansion Module Installation and Safety Guide for the AT-A65
■
module only
AT-A45/xx Series, AT-A46, and AT-A47 Expansion Modules Installation Guide
■
for the other expansion modules available for AT-8600 Series switches.
You can download these documents and updates from
www.alliedtelesis.com/support/software.
®
You need Adobe Acrobat
documents. You can download it from www.adobe.com.
Adding and Removing Expansion Modules
Hot-swapping expansion modules is possible on AT-8624PoE and
AT-8624T/2M switches. If a module is inserted or removed while the switch is
powered on, the Fault LED flashes 7 times. You must restart the switch to turn
off the flashing LED, and make a module ready for operation. Until the switch
is restarted, the output of the show system and show switch port commands
cannot reflect the newly inserted or removed expansion module.
Port Type
100Base-FX
100Base-FX
100Base-FX
10/100/1000BASE-T
1000Base-T (GBIC)
1000Base-X SFP
expansion bay, or
10/100/1000Base-T
copper port
® ®
Reader software to view, search, or print these
11
Connector Type
MT-RJ
SC
SC
RJ-45
GBICs are sold separately.
SFPs are sold separately.
Copper port takes an
RJ-45 connection.