Cable Guidelines; Using At-Tftp Server - Allied Telesis AT-8600 Hardware Reference Manual

Hardware Reference
Model Port Type(s)
AT-8624T/2M, 10BASE-T/100BASE-TX
AT-8624PoE
AT-8648T/2SP 10BASE-T/100BASE-TX
10/100/1000BASE-T
SFP
1. Refer to the IEEE 802.3 standards for further cable information
C613-03080-00 REV G

Cable Guidelines

The following table lists port, connector, and cable combinations for each
model.
Connector
Type(s)
RJ-45
RJ-45
RJ-45
RJ-45
Fibre

Using AT-TFTP Server

This section explains how to access and use the AT-TFTP Server. You can
transfer configuration files as well as download software upgrades with
AT-TFTP Server.
1. If AT-TFTP Server has not been installed, install it from the Documentation
and Tools CD-ROM.
Select AT-TFTP Server from the Start > Programs > Allied Telesis >
AT-TFTP Server menu.
2. To set preferences for the AT-TFTP Server, select Options from the File
menu to display the Set Preferences dialog box shown below.
The "Default file transfer directory" field specifies the directory that
AT-TFTP Server reads from or writes to for file requests that do not include
a directory specification.
1
Cable Type
10BASE-T Category 3 or better
100BASE-TX Category 5 or better
10BASE-T Category 3 or better
100BASE-TX Category 5 or better
1000BASE-T Category 5e, or better
1000BASE-T Category 5e, or better
Fibre Cable
21
Maximum
Cable Length
100m (328ft)
100m (328ft)
100m (328ft)
100m (328ft)
Dependent on
SFP type