Using Windows Terminal And Hyperterminal - Allied Telesis AT-8600 Hardware Reference Manual

22
C613-03080-00 REV G
Enter a path name in the "Restrict to directory" field to prevent
unauthorised access to private directories. AT-TFTP Server uses the
specified directory even when file requests contain references to other
directories.
To prevent files from being written to the PC, click the Read only checkbox.
To use the PC to archive scripts created using the switch's create config
command, click the Read Write checkbox.
Click the OK button when you finish.
3. To load a file from AT-TFTP Server to the switch, type the following
command on a terminal connected to the RS-232 Terminal Port (ASYN0):
load method=tftp file=filename server=ipadd dest=flash
where filename is the name of the file to download and ipadd is the IP
address of the PC running AT-TFTP Server.
To save a TFTP Server log, select Save As from the File menu. TFTP
4.
requests are logged to the AT-TFTP Server main window.
Using Windows Terminal and
Hyperterminal
You can use a PC running terminal emulation software as the manager console,
instead of a terminal. There are many terminal emulation applications
available for PCs, but the most readily available are the Terminal and
HyperTerminal applications included in Microsoft Windows 98, 2000, and
XP Professional. In standard Windows installations, HyperTerminal is
available from the Communications submenu.
The key to successful use of terminal emulation software with the switch is to
configure the software and switch with matching communications parameters.
The following procedure can be applied to most terminal emulation programs.
Dialog boxes in the procedure are from Windows 2000 and XP Professional.
To configure Windows HyperTerminal for 2000 and XP Professional
1. Start the program in Windows by doing one of the following:
• Select Programs > Accessories > Communications > HyperTerminal.
• Double-click the Hypertrm.exe icon.
AT-8600 Series