Models Covered By This Document; Hardware Description; Switch Overview - Allied Telesis AT-8600 Hardware Reference Manual

4
Dimensions
Mounting system
Environmental
conditions
Regulatory
standards
LEDs
C613-03080-00 REV G

Models Covered by this Document

This Hardware Reference includes information on the following models:
AT-8624T/2M 24-port 10BASE-T/100BASE-TX
■
AT-8624PoE
■
AT-8648T/2SP 48-port 10BASE-T/100BASE-TX
■
The latest Hardware Reference can be found at
support/software.

Hardware Description

This section provides an overview of the hardware features for AT-8600 Series
switches. Hardware descriptions for expansion modules are in the Expansion
Modules Installation Guide. These references can be found on the CD-ROM
provided with your switch, or can be downloaded from
www.alliedtelesis.com/support/software.

Switch Overview

RJ-45 copper ports ensure industry-standard compatibility, while two
expansion module bays add configuration flexibility.
Height = 44 mm (plus 5.5 mm if the rubber feet are used)
■
Width = 440 mm (excluding rack-mounting brackets)
■
Depth:
■
• AT-8624T/2M = 223mm
• AT-8624PoE = 408mm
• AT-8648T/2SP = 254mm
Weight = not more than 7 kg (excluding power cord and expansion
■
modules)
1 RU 19-inch rack mounting
■
Operating temperature range: 0 to 40º C (32 to 104º F)
■
Storage temperature range: -25 to 70º C (-13 to 158º F)
■
Operating humidity range: 5% to 80% non-condensing
■
Storage humidity range: 5 to 95% non-condensing
■
EMC: EN55022, AS/NZS CISPR22 class A, FCC CFR47 Part 15 Class A,
■
and VCCI Class A
Immunity testing to EN55024
■
Flicker and Harmonics testing to EN61000-3-2 and EN61000-3-3
■
Safety: UL60950-1, CAN/CSA-C22.2 No. 60950-1-03, EN60950-1,
■
EN60825-1
Ethernet port and System status LEDs
■
Mode button
■
For a complete list of LEDs and their functions, see
■
AT-8600 Series
www.alliedtelesis.com/
"LEDs" on page 7.