Wan; Pppoe - Billion BiPAC 9800 User Manual

(802.11n) fiber optical router
Hide thumbs Also See for BiPAC 9800:
Table of Contents

Advertisement

WAN

A WAN (Wide Area Network) is an outside connection to another network or the Internet.

PPPoE

PPPoE (PPP over Ethernet) provides access control in a manner which is similar to dial-up services
using PPP.
Protocol: Select the protocol you will use in the device.
Username: Enter the username provided by your ISP. You can input up to 256 alphanumeric
characters (case sensitive).
Password: Enter the password provided by your ISP. You can input up to 32 alphanumeric
characters (case sensitive).
Service Name: This item is for identification purposes. If it is required, your ISP will provide you
the necessary information. Maximum input is 32 alphanumeric characters.
Auth. Protocol: Default is Auto. Please consult your ISP on whether to use PAP, CHAP or
MSCHAP.
IP Address: Enter your WAN IP address. Leave the IP address as 0.0.0.0 to enable the device to
automatically obtain an IP address from your ISP.
MTU: Maximum Transmission Unit. The size of the largest datagram (excluding media-specific
headers) that IP will attempt to send through the interface.
Click Apply to confirm the settings.
40

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bipac 9800n

Table of Contents