Billion BiPAC 9800 User Manual page 31

4. The device will reboot and then load the new configuration.
Note: If any error occurs during device configuration that results in WAN connection
failure, the system will prompt that the setup has failed.
5. If all information provided is valid and the device successfully connects to WAN, a dialog box
will appear to signify the completion of the WAN port setup. At this point you can either click
Done to finish the EZSO configuration or you can click Next to wireless to proceed to the wire-
less configuration if you have.
6. Select Enable and enter the necessary information in the blanks provided for the Wireless LAN
setting (wireless setting is only available for BiPAC 9800(N)) if you would like to use this feature
and then click Continue.
28