Billion BiPAC 9800 User Manual page 60

(802.11n) fiber optical router

Hide thumbs Also See for BiPAC 9800:

Table of Contents

Wi-Fi Network Setup

PIN Method: Configure AP as Registrar

1. Jot down the client's Pin (eg. 16837546).

2. Enter the Enrollee's PIN number and then press Start.

3. Launch the wireless client's WPS utility (eg. Ralink Utility). Set the Config Mode as Enrollee,

press the WPS button on the top bar, select the AP (eg. wlan-ap) from the WPS AP List column.

Then press the PIN button located on the middle left of the page to run the scan.

Table of Contents

Bipac 9800n