Table of Contents
Advertisement
Step 6: Double-click on the icon to display your current Internet connection status.
Web Configurator Easy Access
With UPnP, you can access web-based configuration for the BiPAC 9800(N) without first finding
out the IP address of the router. This helps if you do not know the router's IP address.
Follow the steps below to access web configuration.
Step 1: Click Start and then Control Panel.
Step 2: Double-click Network Connections.
Step 3: Select My Network Places under Other Places.
Step 4: An icon describing each UPnP-enabled device shows under Local Network.
Step 5: Right-click on the icon of your BiPAC 9800(N) and select Invoke. The web configuration
login screen displays.
Step 6: Right-click on the icon of your BiPAC 9800(N) and select Properties. A properties window
displays basic information about the BiPAC 9800(N).
100
Advertisement
Table of Contents
