Device Description; The Front Leds - Billion BiPAC 9800 User Manual

Device Description

The Front LEDs

LED
1 Internet
2 WAN
WPS
3 (BiPAC 9800N
only)
Wireless
4
(BiPAC 9800N
only)
Ethernet port
5
1X — 4X
(RJ-45 connector)
6 Power
Lit orange when WAN port fails to get IP address.
Lit green when WAN port gets IP address successfully.
Lit off when the device is in bridge mode or when WAN connection
absent.
Lit green when the device is connected to a broadband connection
device.
Blinking when data is transmitted/received.
Flash green when WPS configuration is in progress. However, if
WPS fails, the LED will only lit for 1 min before goes off.
Lit green when a wireless connection is established.
Flash green when data is transmitted/received.
Lit orange when one of LAN ports is connected to an Ethernet
device.
Lit green when the speed of transmission hits 1000Mbps; Lit orange
when the speed of transmission hits 10/100Mbps.
Blinking when data is transmitted/received.
When the device is booting, the green light will lit while the orange
light will flash.
When the system is ready, it will lit green.
Lit orange when the device fails to boot or when the device is in
emergency mode.
Meaning
8