Table of Contents
Advertisement
SNMP Access Control
Software on a PC within the LAN is required in order to utilize this function – Simple Network
Management Protocol.
Parameters
SNMP: Select Enable/Disable to activate/inactivate this function.
SNMP V1 and V2
Read Community: Specify a name to be identified as the Read Community, and an IP address.
This community string will be checked against the string entered in the configuration file. Once the
string name is matched, user obtains this IP address will be able to view the data.
Write Community: Specify a name to be identified as the Write Community, and an IP address.
This community string will be checked against the string entered in the configuration file. Once the
string name is matched, users from this IP address will be able to view and modify the data.
SNMP V3
Specify a name and password for authentication. And define the access right from identified IP
address. Once the authentication has succeeded, users from this IP address will be able to view
and modify the data.
Click Apply to confirm the settings.
102
Advertisement
Table of Contents
