Billion BiPAC 9800 Quick Start Manual

(802.11n) fiber optical router
Hide thumbs Also See for BiPAC 9800:

Advertisement

Quick Links

BiPAC 9800(N)
(802.11n) Fiber Optical Router
Quick Start Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BiPAC 9800 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Billion BiPAC 9800

  • Page 1 BiPAC 9800(N) (802.11n) Fiber Optical Router Quick Start Guide...
  • Page 3: Package Contents

    Billion BiPAC 9800(N) (802.11n) Fiber Optical Router PLEASE READ THE QUICK START GUIDE AND FOLLOW THE STEPS CAREFULLY. THIS QUICK START GUIDE WILL HELP YOU INSTALL THE DEVICE PROPERLY AND AVOID IMPROPER USAGE. IF YOU NEED MORE INFORMATION ON THIS SOFTWARE CONFIGURATION, PLEASE REFER TO THE USER MANUAL ON CD-ROM.
  • Page 4: Hardware Overview

    Quick Start Guide Hardware Overview The Front LEDs When the power is on it will be lit green. When the system is Lit green when the device is (BiPAC 9800N only) booting it will blink orange. connected to a broadband Lit green when a wireless When the system is ready it connection device.
  • Page 5 Billion BiPAC 9800(N) (802.11n) Fiber Optical Router • 100BASE-BX: A single strand of optical fiber. Single-mode fiber is used. It supports SC connector. • 1000BASE-BX: A single strand of optical fiber. Single-mode fiber is used. It supports SC connector. Dual SC Ports Dual fiber WAN interface is separated into single-mode and multi-mode.
  • Page 6 Quick Start Guide SFP Port Install the Mini-GBIC module into the SFP cage. Connect the fiber cable to the fiber port of Mini-GBIC module. We offer 2 types of SFP interfaces: 100Base-SFP and 1000Base-SFP, and they do not coexist. Please refer to the figure shown below. *2 A cage for SFP (Small Form-Factor Pluggable) transceiver- 100BASE or 1000BASE optical convector.
  • Page 7: Hardware Connection

    Billion BiPAC 9800(N) (802.11n) Fiber Optical Router Hardware Connection Hardware Installation 1. Power Connection Plug the supplied power adapter into the wall jack and the other side to the router. Please note that the plug type may differ according to country.
  • Page 8 Quick Start Guide 2. LAN Connection Connect the supplied RJ-45 Ethernet cable to one of the Giga Ethernet ports, and the other side to the PC’s Ethernet interface. 3. Fiber Connection Please follow the illustrations below to connect the fiber cable or module and the router.
  • Page 9: Connecting To The Router

    Billion BiPAC 9800(N) (802.11n) Fiber Optical Router b) LX/ FX Insert the dual fiber cable into the TX and RX jacks separately of the router. c) SFP Set the Mini-GBIC module in the SFP port of your device, and then connect the fiber cable to the module.
  • Page 10: Troubleshooting

    Contact Billion WORLDWIDE http://www.billion.com Billion Product Registration Billion is committed to before and after sales customer services. You will get the most out of your Billion's products after registration. Please register online at http://www.billion.com/register to receive valuable services and support from us.

This manual is also suitable for:

Bipac 9800n

Table of Contents