Table of Contents
Advertisement
Chapter 3: Basic Installation
The router can be configured through your web browser. A web browser is included as a standard
application in the following operating systems: Linux, Mac OS, Windows 98/NT/2000/XP/Me/Vista/7,
etc. The product provides an easy and user-friendly interface for configuration.
Please check your PC network components. The TCP/IP protocol stack and Ethernet network
adapter must be installed. If not, please refer to your Windows-related or other operating system
manuals.
There are ways to connect the router, either through an external repeater hub or connect directly to
your PCs. However, make sure that your PCs have an Ethernet interface installed properly prior to
connect the router device. You ought to configure your PCs to obtain an IP address through a DHCP
server or a fixed IP address that must be in the same subnet as the router. The default IP address
of the router is 192.168.1.254 and the subnet mask is 255.255.255.0 (i.e. any attached PC must
be in the same subnet, and have an IP address in the range of 192.168.1.1 to 192.168.1.253). The
best and easiest way is to configure the PC to get an IP address automatically from the router using
DHCP. If you encounter any problem accessing the router web interface it is advisable to uninstall
your firewall program on your PCs, as they can cause problems accessing the IP address of the
router. Users should make their own decisions on what is best to protect their network.
Please follow the following steps to configure your PC network environment.
12
Advertisement
Table of Contents
