Setting The Rear Camera Input; Setting The Navigation Mode; Setting The Navigation Interruption - Alpine IVE-W530E Owner's Manual

Setting the Rear Camera Input

With an optional rear camera connected, rear view video is output to the
monitor.
Setting item: Camera IN
Setting contents: OFF / ON
OFF: The Camera mode is not displayed in the mode
switching screen.
ON: Use when the optional rearview camera is
connected to the CAMERA Input Connector.
• By shifting to reverse (R), the rear pictures are output.
This function is effective when the reverse wire is properly connected.
After setting this item to ON, touch the title bar of Camera IN, the
following further setting items can be adjusted.
Setting the Rear Camera Signal Input
The video input signal type can be chosen.
Further Setting item: Camera Signal
Setting contents: NTSC/PAL / Auto
NTSC/PAL: Choose the video input signal type manually.
Auto: The suitable video input signal type will be
automatically chosen between NTSC and PAL.
• When set to Auto, unstable display may occur while playing back
certain black and white video signal. In this case, select NTSC or
PAL mode manually.
Rear camera guide line display setting
You can set whether the rear camera guide line is displayed or
not.
Further Setting item: Guide Line
Setting contents: OFF / ON
Adjusting the Rear Camera Guide line
You can adjust the rear camera guide line position.
Further Setting item: Guide Line Adjustment
1
Touch the title bar of Guide Line Adjustment.
The guide line adjustment screen is displayed.
2
When you touch the guide pylon to be adjusted, a
border appears around the pylon.
3
Drag and drop the selected pylon or centre guide to
adjust its position.
4
After the adjustment is completed, touch [
You can touch [Reset] during adjustment to return to the
default adjustment.
Camera mute setting
You can set whether to mute the source volume when the
camera video is displayed.
Further Setting item: Camera Mute
Setting Contents: OFF / ON

Setting the Navigation Mode

When you connect an optional navigation equipment, set it to ON.
Setting item: Nav. IN
Setting contents: OFF / ON
ON: Navigation source is displayed.
OFF: Navigation source is not displayed. The settings related
to the navigation can not be changed from this unit.

Setting the Navigation Interruption

With an Alpine navigation system connected to the IVE-W530EBT/
IVE-W530ABT/IVE-W530E , the voice guidance of the navigation
system will be mixed with the radio or CD play.
Setting item: Nav. Mix
Setting content: OFF / ON
OFF: The navigation interruption mode is turned off.
ON: The navigation interruption mode is on.
See "Adjusting Nav. Mix Level" under "Adjusting the Audio" on
page 22 to set the navigation interruption volume level.
• The volume level for voice prompts during navigation guidance is set
by adjusting its volume while the prompts are announced. When the
announcement finishes, the normal audio volume and the previous
audio screen are restored. The voice prompt volume is always at or
below the current listening volume. If a navigation announcement
cuts in while adjusting the audio level, it always resets to the current
level regardless of the audio level setting.
• This setting is effective when Nav.IN of SYSTEM list screen is ON.
].
31
-EN