Table of Contents
Advertisement
Voice Dial Operation
You can call the telephone by performing voice operation.
Setting item: Voice Dial
1
Touch [
] to display the item of Voice Dial.
2
Touch the title bar of Voice Dial.
A message is displayed.
• You can also activate Voice Dial mode directly by pressing and
holding
for at least 2 seconds.
3
Touch [Yes] to activate the voice dial mode.
The voice dial mode is activated.
• Touch [No] will return to the Telephone Menu screen.
4
Say the telephone number*, name* you want to call
into the microphone.
* The number and name depend on the voice dial information stored in
the mobile phone.
• If the voice dial fails, the unit will return to normal mode in 30
seconds.
• You can perform this operation only when a voice dial compatible
mobile phone is connected. If the mobile phone is not compatible
with the voice dial, "No Support" is displayed for 2 seconds.
• The Voice Dial function performance depends on the recognition
range of the mobile phone and mounting location of the microphone.
Note when the microphone is mounted.
• Voice dial operation depends on the function of the mobile phone.
For details, refer to the Owner's Manual of the mobile phone.
BLUETOOTH Audio Function
BLUETOOTH Audio Operation
Audio information of a BLUETOOTH compatible mobile phone, a
portable player, etc., is controllable/playable wirelessly* from this unit.
* To play back audio, a mobile phone or a portable player conforming
to A2DP (Advanced Audio Distribution Profile) or AVRCP (Audio/
Video Remote Control Profile) is required.
Not all functions work with all devices.
• During a call, sound on the BLUETOOTH audio source is muted.
• There are times when it cannot be operated with the device which you
use.
Recalling the BLUETOOTH audio source
1
Press SOURCE/
on the unit.
The SOURCE selection screen is displayed.
2
Touch the [BT Audio] icon.
The BT Audio source is activated and the display changes
to the BT Audio main screen.
Selecting the desired Song
Touch [
].
Returns the beginning of the song being played back.
Touch [
].
Forwards the next song.
Touching and holding [
forward track continuously.
Pausing
Touch
[
/
].
A playback stops. Touching again will resume a playback.
38
-EN
] or [
] will fast backward/fast
Rearview Camera
Operation (Optional)
When an optional rearview camera with RCA output connector is
connected, rear view video can be output to the monitor.
• Be sure to set "Camera IN" to "ON" before using the Rearview
Camera, refer to "Setting the Rear Camera Input" on page 31.
Switching the Rear Camera Screen
(Optional)
The rear view video will be displayed for the two situations as below.
Displaying the rear view video while the
car is in reverse
1
Shift the gear lever to the reverse (R) position.
The rear view image is displayed while the car remains in
reverse.
2
If you shift the gear lever to a position other than
reverse (R), the monitor returns to the previous
screen.
• Be sure to also check behind the car visually. Use the camera image
to assist in showing conditions behind the car.
• This function is effective when the reverse wire is properly connected.
• No sound output during Camera view display when ON is set in
"Camera mute setting" (page 31).
Displaying the rear view video manually
1
Press SOURCE/
on the unit.
The SOURCE selection screen is displayed.
2
Touch [Camera].
The Camera mode is activated and the rear view video is
displayed.
3
Touch [Guide ON] or [Guide OFF] to set whether
the rear camera guide line is displayed.
4
Touch [
] to access to Visual selection screen, and
then touch [Normal] to return to previous main
screen.
Hide quick links:
Advertisement
Table of Contents
