Source Setup; Source Setup Operation; Radio Setup; Display Setup - Alpine IVE-W530E Owner's Manual

Source Setup

Source Setup Operation

The Parking Brake must be engaged to access the Source
mode screen. Attempting to access this screen while driving
will display the warning-Can't operate while driving.
The following steps 1 to 5 are common operations to each
"Setting item" of Radio Setup. Refer to each section for details.
1
Touch [ ] on the main screen.
The SETUP selection screen is displayed.
2
Touch the title bar of Source Setup.
The SOURCE SETUP screen appears.
3
Touch the title bar of your desired Setup mode.
1
DVD Setup* /Radio Setup/BLUETOOTH Setup*
1
* Refer to "DVD Setup" on page 24.
2
* Displayed when "BLUETOOTH IN" is set to other than "OFF"
(page 32). (IVE-W530EBT/IVE-W530ABT only)
4
Touch [ ], [ ] or the title bar, etc. of the desired
item to change its setting.

Radio Setup:

FM Level
BLUETOOTH Setup: (IVE-W530EBT/IVE-W530ABT only)
Paired Devices / Device Search / Clear Device / Service Provider /
Visible Mode / Auto Answer / Speaker Select / MIC Input /
Firmware Version / Firmware Update / BT Menu Language /
Shortcut Memory
• For BLUETOOTH Setup details, refer to "BLUETOOTH Setup"
(page 33).
5
Touch [ ] to return to the previous screen.
Radio Setup
"Radio Setup" is selected on the source setup main menu in step 3.
Adjusting Source Signal Levels
If the difference in volume level between the CD and FM radio is
too great, adjust the FM signal level as follows.
Setting item: FM Level
Setting content: Low / High
26
-EN

Display Setup

Display Setup Operation

The Parking Brake must be engaged to access the Display mode
screen. Attempting to access this screen while driving will display
the warning-Can't operate while driving.
The following steps 1 to 4 are common operations to each
"Setting item" of Display Setup. Refer to each section for
details.
1
Touch [
The SETUP selection screen is displayed.
2
Touch the title bar of Display Setup.
The Display Setup screen appears.
3
2
Touch [ ] or [ ] etc., of the desired item to change
its setting.
Setting items:
Visual EQ*
Fade / Base Color / Screen Alignment / Visual Key
1
For details, refer to "Visual EQ Setting Operation" on page 27.
*
2
Not displayed when "Dimmer" is set to "OFF".
*
4
Touch [
• Touching [Exit] will turn off the Display Setup screen, and return to
previous main screen.
• Immediately after changing the settings of Display Mode (While the
system is writing data automatically) do not turn the ignition key
(engine key) to OFF.
Otherwise, the settings may not be changed.

Setting the Brightness of the Backlighting

Backlighting is provided by a fluorescent light built into the liquid
crystal panel. The illumination control adjusts the brightness of the
backlighting based on the car ambient lighting for easier viewing.
Setting item: Dimmer
Setting content: Auto / ON / OFF
Auto:
ON:
OFF:
• When ON or Auto is set, the setting is also applied for the button
lighting in "Adjusting the Dimmer of Button Lighting at Night"
(page 30).
] on the main screen.
1
/ Dimmer / Screen Dimmer Level*
] to return to the previous screen.
Adjust the brightness of the background illumination of
the monitor automatically to the brightness of the car
interior.
Keep the background illumination of the monitor dark.
Deactivate Auto Dimmer mode to keep the background
illumination of the monitor bright.
2
/ Function Guide