Hands-Free Phone Control; About The Hands-Free Phone; Answering A Call; Hanging Up The Telephone - Alpine IVE-W530E Owner's Manual

Hands-Free Phone Control

About the Hands-Free Phone

Hands-free calls are possible when using a HSP (Head Set Profile) and
HFP (Hands-Free Profile) compatible mobile phone with this unit.
• Avoid performing a hands-free call in heavy traffic or on narrow or
winding streets.
• Close the windows while calling to reduce background noise.
• If both calling parties are using hands-free devices, or the call is
made in a noisy location, difficulty hearing the other person's voice
is normal.
• Depending on telephone line conditions or certain mobile devices
used, voices may sound unnatural.
• When using a microphone, speak as directly as you can into the
microphone to pick up the best sound quality.
• Certain mobile phone features are dependent on the capabilities and
settings of your service provider's network. Additionally, certain
features may not be activated by your service provider, and/or the
provider's network settings may limit the feature's functionality.
Always contact your service provider about feature availability and
functionality.
All features, functionality, and other product specifications, as well
as the information contained in the Owner's Manual are based upon
the latest available information and are believed to be accurate at
the time of printing.
Alpine reserves the right to change or modify any information or
specifications without notice or obligation.

Answering a Call

Incoming calls are announced by the received call ring tone and a
displayed message (Caller name/PHONE No.).
Touch [ ].
The call starts.
• Indicator (Signal Strength):
While calling, the indicator will display the current signal strength of
your mobile phone. While in a mode other than Calling, the unit
cannot read the signal strength of the mobile phone exactly. In this
case, the indicator displays the signal strength of the last call.
• When "Setting the Received Calls automatically (Auto Answer)"
(page 34) is set to ON, you can receive a call automatically.
• While calling, the source sound on the unit is muted.
After calling, playback will resume.

Hanging up the Telephone

Touch [ ].
The call finishes.
Adjusting the volume when receiving a
Call
While calling, you can adjust the volume. The adjusted volume level is
stored.
Turn the Rotary encoder to adjust the volume.
• You may need to increase volume from your regular audio listening
source level. However, increasing the volume excessively may result
in feedback. If feedback is noticed as feedback is directly related to
the volume, turn down the volume as low as acceptable to eliminate
it. Positioning the microphone in a direction away from the main car
speakers (e.g. clipped on sun visor) may also reduce feedback at high
volume.

Redial Function

You can redial the person you have previously called.
After finishing a call, touch [
5 seconds.
The telephone is redialed.

Call waiting function

If a second call is received during a current call, you can have the first
caller wait momentarily while you take the second call. When you are
finished with one call, you can switch to the other one.
1
If a second call is received during the current call
(caller 1), the number of second caller (caller 2) is
displayed instead of the current caller's information.
Touch [ ], the call waiting mode is activated.
In this case, caller 1 is on hold, while you take caller 2.
Display example for the 2nd incoming call screen
Second call message
A
Hang up the first call and the second incoming call is
answered.
Hang up the second incoming call.
Display example for the 2nd incoming call screen
B
Feedback of the connected second call
B
] on the screen within
A
35
-EN