Alpine IVE-W530E Owner's Manual page 50

• Button operation on the unit or remote control (optional) is not
possible.
- For some discs or playing modes, certain operations are not
possible. This is not a malfunction.
• Mechanism error.
1) Press and eject the disc.
If not ejecting, consult your Alpine dealer.
2) When the error indication remains after ejecting, press
again.
If the error indication still does not turn off after pressing
for a few times, consult your Alpine dealer.
• Scratched disc, contaminated disc/poor recording/disc
incompatible with this unit.
- Press .
- Change the disc.
• Disc does not match regional code number.
- Load a disc that matches the regional code number.
Indication for Flash Memory
• Abnormal current is run to the USB connector device.
- You can solve the problem by switching the source.
• A USB device that is not supported by the unit is connected.
- Connect a USB device that is supported by the unit.
• A Flash Memory is not connected.
- Make sure the Flash Memory device is correctly connected and
the cable is not excessively bent.
• No song (file) is stored in the Flash Memory.
- Connect the Flash Memory device after storing songs (files).
48
-EN
• A sampling rate/bit rate not supported by the unit is used.
- Use a sampling rate/bit rate that is supported by the unit.
• A copy-protected WMA file was played back.
- You can only play back non-copy-protected files.
Indication for iPod Mode
• The iPod/iPhone is not connected.
- Make sure the iPod/iPhone is correctly connected (refer to
"Connections").
Make sure the cable is not bent excessively.
• There are no songs in the iPod/iPhone.
- Download songs to the iPod/iPhone and connect to the
IVE-W530EBT/IVE-W530ABT/IVE-W530E.
• Abnormal current is run to the USB connector device.
- You can solve the problem by switching the source.