Tue-T200Dvb Operation (Optional); Operating The Tue-T200Dvb (Optional); Flash Memory (Optional); Bank Function - Alpine IVE-W530E Owner's Manual

TUE-T200DVB
Operation (Optional)

Operating the TUE-T200DVB (Optional)

Operable when optional TUE-T200DVB is connected.
When DVB-T is selected in "Setting the AUX Mode" (page 32), the
source is displayed in SOURCE selection screen.
1
While your vehicle is parked, press SOURCE/
The SOURCE selection screen is displayed.
2
Touch [DVB-T].
The DVB-T screen is displayed.
3
Perform the desired operation.
Channel Number UP/Down or Favourite Channel Number
Up/Down
Touch [CH.]* to select changing the Channel or the Favourite
Channel.
Touch CH. [ ] or [ ] to move the Channel number Up/Down.
Touch FAV [ ] or [ ] to move the Favourite Channel number Up/
Down.
* The button displays the current changing mode ([CH.] or [FAV]).
Calling up Main Menu Screen
Touch [MENU] to call up the main menu screen.
Calling up Menu Operation Mode
Touch [MENU CONT] to call up the menu operation mode.
Switching the Source
Touch [A/V].
The source switches with each touch.
Calling up Electronic Programme Guide (EPG)
Touch [EPG] to call up the Electronic Programme Guide.
Scanning Mode
1
Touch [P1/3].
The function guide appears.
2
Touch [SCAN] to start the auto scan procedure.
• For detail, refer to the Owner's Manual of the TUE-T200DVB (sold
separately).
Video Menu Operation of TUE-T200DVB
1
Touch [P1/3] twice.
The direct touch mode screen is displayed.
• When the optional TUE-T200DVB is connected, you can control it by
the touch key (except the [Control] key) on the display screen of the
unit.
2
Touch [Control].
Return to DVB-T main screen.
• If no operation is performed for 5 seconds, the screen will
automatically switch to the full screen mode.
40
-EN
Flash Memory
(Optional)
A Flash memory can be connected to this unit through the USB
Connector of this unit.
If a Flash memory device is connected to the unit, MP3/WMA/AAC/
DivX files of Flash memory can be played back.

BANK Function

.
What is a Bank?
A bank is a unit of up to 1,000 songs, which is stored in memory.
"Banking" refers to the grouping of songs available in Flash
Memory, in banks of 1,000 songs each.
About Banking
While a bank is being built up, "Banking" is displayed. Banking
occurs whenever a Flash Memory device is connected or after
power to the head unit turns on.
It can take anywhere from a few seconds to up to several
minutes for banking to complete. This depends on the number
of files and folders in Flash Memory.
Available operations while Banking
• Search functions, such as album search or tag information
(artist display, etc.) are available during the banking process.
However, during such time, tag information display changes.
• Regular fast-forwarding and next song selection are
available.
• During Banking, the played back song order may differ from
the song order in Flash memory.
This unit has the BANK function that automatically divides every 1,000
songs stored in Flash memory into individual banks to make searching
and playing back a song easier. A maximum of 1,000 songs for one
bank can be stored according to the order stored in Flash memory. A
maximum of 20 banks (20,000 songs) can be recognised. BANK1
(songs 1 to 1,000) is set as the default. If you want to search beyond
1,000 songs, perform the following operation to select a different bank.
BANK No.
BANK1
BANK2
BANK20
1
Touch [P1/2] to change the function guide.
2
Touch BANK [
BANK.
Each operation can be performed in the selected bank.
• Even if the files are contained in the same folder, they may be saved
as different BANK.

Playback

1
Press SOURCE/
The SOURCE selection screen is displayed.
2
Touch [USB], the USB mode is activated and the
display changes to the USB screen.
Song number
1~1,000
1,001~2,000
19,001~20,000
] or [ ] to select the desired
.