Table of Contents
Advertisement
SYSTEM Setup
System Setup Operation
The Parking Brake must be engaged to access the System mode
screen. Attempting to access this screen while driving will display
the warning-CAN'T OPERATE WHILE DRIVING.
The following steps 1 to 5 are common operations to each
"Setting item" of SYSTEM Setup. Refer to each section for
details.
1
Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
2
Touch [OTHER SETUP].
The OTHER SETUP screen appears.
3
Touch [
] of SYSTEM SETUP.
The SYSTEM setup screen appears.
4
Touch [ ], [ ] or [OFF], [ON], etc., of the desired
item to change its setting.
Setting items:
IN INT. MUTE / IN INT. ICON / NAV. IN / NAV. MIX / VISUALIZER*
/ AUX IN-1 / AUX IN-2* / AUX IN-3* / MONITOR OUT-1 /
MONITOR OUT-2* / CAMERA IN / VISUAL KEY /
ILLUMINATION COLOR (IVA-D310R only) / A. PROC TYPE /
OPTICAL OUT
* Displayed when the external expansion box VPE-S431 is
connected.
5
Touch [RETURN] to return to the previous screen.
Touch [CONTROL] to return to the main source screen that
was displayed before the setup operation was started.
• Immediately after changing the settings of System Mode (While the
system is writing data automatically) do not turn the ignition key
(engine key) to OFF.
Otherwise, the settings may not be changed.
34
-EN
Setting the External Device Interrupt Mode
If an Alpine Ai-NET Interrupt Box (NVE-K200) is connected to the
IVA-D310R/IVA-D310RB, an Auxiliary Source will be allowed to
interrupt the current audio source. For example, you can listen to the
voice guidance of your navigation system when it occurs even while
you are playing a CD or DVD. The CD/DVD player will be
automatically muted during voice guidance. For further details, please
refer to the manual for NVE-K200.
Setting item: IN INT. MUTE
Setting content: OFF / ON
OFF: The volume level can be adjusted in Interrupt mode.
ON:
Sound will not be output. The icon that is set in "Setting
the Interrupt Icon Display" is displayed.
• The auxiliary device being connected must have an Interrupt wire
with a negative trigger for this function to operate automatically.
Otherwise, a separate switch needs to be added to switch it manually.
Setting the Interrupt Icon Display
The unit can display the icon of an external device, such as a telephone,
whenever a phone call comes in to tell you there is a phone call.
Setting item: IN INT. ICON
Setting content: INT / TEL
INT:
The INT icon appears on the display.
TEL: When the external device (telephone) sends the interrupt
signal, the telephone icon appears on the display.
Setting the Navigation Mode
When you connect an optional navigation equipment, set it to ON.
Setting item: NAV. IN
Setting contents: OFF / ON
ON:
Navigation source is displayed.
OFF: Navigation source is not displayed. The settings related
to the navigation can not be changed from this unit.
Hide quick links:
Advertisement
Table of Contents
