System Example - Alpine IVA-D310RB Owner's Manual

System Example

Connect the Ai-NET compatible audio processor (Fiber digital compatible), Navigation system, DVD player and
changer.
NVE-N077PS/NVE-N099P
Navigation system
(Sold Separately)
IVA-D310R/IVA-D310RB
Tuner BOX
POWER SUPPLY
REMOTE IN / OUT
NAVIGATION IN
DISPLAY OUT
EQ/DIV
NORM
(White/Brown)
(White/Brown)
REMOTE OUT
REMOTE IN
• When the fiber digital compatible product is connected, it is necessary to set the mode of this unit. Refer to "Setting the Digital Output" (page 36)
and set to ON. Then refer to "Optical Digital Input Selection for an External Audio Processor" (page 36) and switch the setting.
• * When connecting with PXA-H510 :
- Connect the fiber digital input terminal to the DVD.
- IVA-D310R/IVA-D310RB and DVA-5205P or DVA-5210 cannot be connected simultaneously when fiber digital is in use.
• When the NVE-N055PS is connected for the Navigation System, use the RGB conversion cable KCE-030N (Sold separately).
Please observe the following when using Fiber Optic Cable.
• Do not coil the Fiber Optic Cable smaller than a 30 mm radius.
• Do not place anything on top of the Fiber Optic Cable.
74
-EN
SUBW.
PRE IN/OUT REAR
FRONT
Ai-NET
EXT.OUT
Ai-NET
AV SELECTOR
cable
CAMERA IN
AUX OUT
VIDEO
L
AUDIO
R
AUX IN
RADIO ANTENNA IN
Fiber optic cable
(Yellow)
DVD Video Player (Ai-
NET) (DVA-5210 etc.)
(Sold Separately)
IVA-D310R/IVA-D310RB Monitor
*Fiber digital Input terminal
(for head unit)
Audio Processor (Ai-NET)
(Fiber Digital compatible)
(Sold Separately)
Fiber digital
Input terminal
(for DVD
Player)
CD Changer
Ai-NET cable
(Ai-NET)
(Sold Separately)
**Only connect fiber digital compatible CD Changer
Fiber optic
cable
Fiber digital
Input terminal
(for Changer)
Ai-NET
cable
**Fiber
optic cable